资源列表
2812-test-program
- 2812B的白光流水测试测试程序，用STC105W单片机控制。-2812 b of white water test procedures, using STC105W single-chip microcomputer control.
klt
- KLT_READ_FEATURE_TABLE Read a feature table written by KLTWriteFeatureTable.-KLT_READ_FEATURE_TABLE Read a feature table written by KLTWriteFeatureTable.
duogongnengshuzishizhong
- 多功能数字时钟，可以精确到秒，并在数码管上显示。-Multi function digital clock, can be accurate to seconds, and in the digital tube display.
ProcessG75
- 控制电机运动的G代码程序,如果对G代码不清楚,请先看懂G代码,然后再看本程序.
DA
- AD421的单片机接口程序,都有详细注释
232_485
- 通过485读取国标电表的有功电量，并通过232 发送出来
TIME
- this a c program,be careful
km33314
- 公司产品上的部分程序３，已在２００８上市的产品中得到应用.
24c04
- 存储器 24c04 eeprom 51系列 汇编的源代码
fet440_uart11_38400
- Echo a received character, RX ISR used. Normal mode is LPM0. // USART1 RX interrupt triggers TX Echo. // Baud rate divider with 1048576hz = 1048576/38400 = ~27.31 (01Bh|03h) // ACLK = LFXT1 = 32768Hz, MCLK = SMCLK = default DCO = 32 x ACLK = 10
44keyboard
- 通过4*4键盘输入键值，经过单片机处理，显示在4个led显示屏上-Through 4* 4 keyboard keys, after single-chip processing, displayed on the screen 4 led
bb001
- 用1602显示的电子密码锁，用80c51单片机实现-1602 display with electronic locks, with 80c51 MCU