资源列表
ht1381
- 基于avr单片机的ht1381驱动,已在项目中使用-Based avr microcontroller ht1381 driver has been used in the project
IR
- 单片机编写的红外遥控程序，带LCD显示，已经通过验证.-Infrared remote control MCU written procedures, with LCD display, has been validated.
uart
- LPC11C14 CORTEX-M0 单片机的串口使用程序，包含串口初始化，串口接收字节数据，串口发送字节数据 ，串口发送数组数据-LPC11C14 CORTEX-M0 microcontroller serial port using the program, including the serial port initialization, serial data received byte, send byte serial data, serial data transmit array
CRC
- 在用单片机写通信程序是，如红外通信，RS485，MAX232等，串行发送数据的时候回出现发送和接收到的数据不一致，这时候就需要校验，CRC校验是一种快速有效的方式-In written communication with the microcontroller program is as infrared communication, RS485, MAX232, etc., when the serial transmit data back to the emergence of send
AD9516_driver_by_STM32
- AD9516是ADI公司的产品，它有14路时钟输出，内部VCO高达2.2GHz，本代码是AD9516的STM32驱动，经验证好使，默认配置为第8路时钟输出270MHz。-AD9516 is a product of ADI which has 14-Output Clock Generator with Integrated 2.2 GHz VCO,this code is the driver of AD9516 ,use STM32.
lcd12864
- 使用51单片机和12864显示ds18b20采集的当前温度-The use of 51 microcontroller and 12864 displays the current temperature acquired ds18b20
CSH1287
- 51单片机对时钟芯片ds12887和EEPROM93C46初始化，预置日期时间。模拟联机调试时可能需要频繁调用-51 of the clock chip microcontroller and EEPROM93C46 ds12887 initialization, date preset time. On-line debugging simulation may require frequent calls
lcdgergrt
- 基于ＭＳＰ４３０单片机的ＬＣＤ显示电流表程序！-based on the MSP430 LCD Display ammeter procedures!
main
- 单片机MSP430147的LCD液晶显示程序
AT45DB081
- Flash 存储器，应用于单片机资料存储，更改对应IO即可使用
hf3226
- 这是HF3226与52单片机的通信程序,该程序主要是用测量频率的手段来测量空气湿度
9012_IR_jianma_program
- 9012红外解码c程序 9012_IR_jianma_program 把接收到的数据解码！