资源列表
mcp3208-driver--c
- AD转换芯片mcp3208底层驱动源代码，硬件平台stm32 + mcp3208-AD converter chip mcp3208 underlying driver source code, hardware platform stm32+ mcp3208
adcMain
- P87C591的a/d 转换程序，可在keil 51下调试运行，也可将其参数修改后作为函数使用。-P87C591 the a / d conversion, in the next 51 c51 debugging operation, but also its parameters can be modified as a function use.
8255
- 8255扫描键盘、显示程序 利用8255可编程并行口做一个扫描键盘实验， 把按键输入的键码，显示在由8279控制的七段数码管上。 8255PA口做键盘输入线，PB口作扫描线。
keycan
- 最经典的键盘扫描程序，不同于普通的扫描，效率超高-MCU SCANF KEY
code
- 比较时钟的另类应用---模拟发送红外遥控的波形 比较时钟一般用来作一个固定的定时器，做系统时钟或固定的时钟任务，-Comparison of the alternative application of the clock to send the infrared remote control--- Simulation waveforms generally used for clock compared to a fixed timer, so the system clock or t
I2CSim_h
- 模拟的I2C。是用IO口模拟的I2C驱动模块程序，非常实用。-Simulation of the I2C. I used IO simulation module I2C driver procedures, very useful.
signal
- 用MCU实现的简易信号发生器，一直在用，很稳定。-MCU achieved with simple signal generator, has been in use, very stable.
Multiple_Interrupt_Handler
- Microchip 的多个中断处理程序，使用PIC16F84A-Microchip' s more than one interrupt handler, use PIC16F84A
KeyScan
- 我自己用的矩阵键盘扫描C51测试程序，已测试通过。-I use the keyboard scan matrix C51 test procedure, have been tested.
RS232
- 基于ATMEGA16单片机的RS232通讯程序，其中还包括了红外遥控32位解码程序。只有一个源文件，无自定义头文件。可直接使用。-Based on ATMEGA16 microcontroller RS232 communication program, which also includes an infrared remote control 32-bit decoder. Only one source file, no custom headers. Can be used direct
main
- 数子频率计 C语言 proteus 仿真-The number of sub-frequency meter C language proteus simulation
ATmega128-adada
- 这是 我自己编写的 ATmega128 关于 ad 和da 的程序，开发环境为 CVAVR.-This is what I have written about the ad and da ATmega128 procedures, development environment for CVAVR.