资源列表
dianzishizhong
- 利用单片机定时器完成计时功能，定时器0计时中断程序每隔0.01s中断一次并当作一个计数，设定定时1秒的中断计数初值为100，每中断一次中断计数初值减1，当减到0时，则表示1s到了，秒变量加1，同理再判断是否1min钟到了，再判断是否1h到了-Completion time using MCU timer functions, Timer 0 interrupt timer interrupt routine once every 0.01s, and as a counter, set the
LPC2138xinhaofashengqi
- 针对低频信号源进行设计，设计以LPC2138为控制芯片，探索研究了低频信号发生器的原理和应用，设计输出频率及幅度可调，频率范围为1HZ～50KHZ的正弦波、方波、三角波、调幅波、调频波及其复合波信号，具有信号频率、波形、幅度变化容易，硬件简单可靠等特点的多功能信号源-Design, design for low-frequency signal source to LPC2138 controller chip, and explore the principles and applicatio
Control-40-relays-c51-process
- 控制40个继电器的单片机程序，串口输出。-Control 40 relays SCM process, the serial output.
Library
- ALTUM AD14备份下来的AD14封装希望对大家有用 ALTUM AD14备份下来的AD14封装希望对大家有用-ALTUM AD14 AD14 back down the package hope to be usefulALTUM AD14 AD14 back down the package hope to be useful
aaa
- 常用于热电偶、应变电桥、流量计、生物电测量以及其它具有较大共模干扰的直流缓变微弱信号的检测。
S12
- MC9S12XS128协处理器例程 c语言开发环境 试用版-MC9S12XS128 coprocessor routines c language development environment for trial
1.8W-Buck-Topology-Power-Supply-with-VIPer12AS.ra
- This board is an auxiliary power supply based on the VIPer12AS monolithic device with rather low output power required. It is a buck (step-down) converter with a positive output voltage referenced to the common ground based on the monolithic device V
Part_1_Physical_Layer_Specification_Ver3.00_Final_
- SD 3.0 PHY SPEC SD 3.0 PHY SPEC-SD 3.0 PHY SPEC
RK27XX-
- Mp4播放器界面修改工具，主要是针对瑞芯微RK27芯片的，可以自己调整开关机，画面，还有部分按键-Mp4 player interface modification tool, mainly for Rockchip RK27 chip, you can adjust your own switch, screen, there are some key
deng
- 很多关于灯的资料，例如点阵方面的资料，Led方面的资料-Many of the material, such as lamp of material, Led dot matrix material, etc
nrf24l01的接收发程序以及资料
- 里面有datesheet（数据资料还有开发手册）以及基于51单片机的收发代码
step7licheng
- PB-B-CAN的step7例程，拷过去就能用-PB-B-CAN in step7 routines, copy can be used in the past