资源列表
tm1638
- 芯片TM1638的按键，显示驱动程序，节省单片机显示按键引脚的方案-Chip the TM1638 keys, display driver
ADC0832
- 芯片ADC0832 C语言驱动源程序，内含头文件和C程序，可经修改头文件管脚定义直接驱动使用-The chip ADC0832 C language driver source code, contains header files and C program, you can use direct drive pin definitions revised header files
read18b20rom
- 18b20是单总线数字温度传感器，可以在一根总线上挂接多个18b20，这里就需要发匹配ROM命令，需要传感器的64位ROM,本程序可以读出64的数据，在电脑里用串口助手显示出，为多18b20操作做好准备。-18b20 is a single-bus digital temperature sensor can be mounted on the bus in a multiple 18b20, where you need to send Match ROM command, you need
OLED1305
- ssd1305的相关驱动，C语言准确描述，显示程序-ssd1305 Drive
ult
- atmega单片机和超声波模块的发送和接收代码-Send Atmega MCU and ultrasonic module and receiving code
JINGDUABbb
- 51 对AD1211的编程 可供大家参考-AD1211 51 pairs of programming for your reference
ds12887.c
- 用51访问ds12887时钟芯片的C语言程序-visit ds12887 clock chip C Programming Language
rf_blink
- ATMEGA128与CC2420 沟通以及多通道的ADC资料解析
Two_Memsic_LIB
- 美新加速度传感器，AVR双IO口模拟IIC数据采集头文件。实现双两轴加速度传感器拼3轴传感器。拿来直接用，调试稳定通过。-The United States and the new acceleration sensor, AVR I simulated two-IO header files IIC data acquisition. Two dual-axis acceleration sensor 3-axis sensors together. Used directly, throug
dev
- lpc2138的串口驱动。部分功能采用的是标准库函数，大大缩减了代码的编写长度。经ads1.2编译通过-lpc2138 serial driver. Some features used in the standard library function, significantly reduced the length of the preparation of the code. Adopted by the compiler ads1.2
4x4key
- 4x4键盘扫描 应用环境：PICF877A 开发环境：MPLAB 开发语言：C-4x4 keypad scanning applications: PICF877A development environment: MPLAB development language: C
main
- 此文件为红外线发射源代码（keil软件运行）-This file is in the infrared emission source code (keil software running)