资源列表
MPPT
- P&O MPPT for C-code control
GM8142
- 基于GM8142的串口扩展程序，程序由MSP430F247开发，进过测试可用。-The GM8142-based serial port expansion program program developed by MSP430F247 into the test can be used.
1602
- 基于51单片机的keil环境下的1602动态显示-Based on 51 SCM 1602 dynamic display keil environment
MCUqiangdaqi
- 本人自己编写的单片机四路抢答器程序，带有倒计时和蜂鸣器-I have written four Responder SCM procedures, with the countdown and buzzer
I2C
- 次程序是本人自己编写的模拟i2c程序，可用于没有硬件i2c的单片机，移植方便-The second program is written by myself to simulate the I2C program can be used without hardware I2C microcontroller, easy to transplant
intex1
- startup code has configured Timer0
24c61
- 是简单的E2PROM在单片机上的读写程序
89C51dscsj053501
- #include \"at89x51.h\" unsigned char code ddisp[]={0x3f,0x06,0x5b,0x4f,0x66,0x6d,0x7d,0x07,0x7f,0x6f} //段显0123456789,P0口
key
- 按键判断 进行行扫描m表示对应的行数 n表示对应的列数 对应数值亮
I2CRW
- 嵌入式通用EEPROM读写程序.-embedded EEPROM read and write common procedures.
xunxianxiaochechengxu
- 红外巡线小车单片机编程，以下是ATmega16控制的智能小车循迹程序，希望能够对大家有所帮助。 -Infrared XunXian car microcontroller programming, the following is the control of the car follow intelligent ATmega16 tracing program, the hope can be helpful to you.
STEPPER-MOTOR
- 利用新华龙公司生产的C8051F020单片机驱动四相步进电机，可实现单拍、双拍、四相八拍的正转反转即变速功能。所需驱动电路由达林顿三极管组成-The use of single-chip four-phase stepper motor drive can achieve single-shot two-shot film of the eight four-phase reverse switch that is required for variable-speed function dri