资源列表
LEDJZ
- 通过数码管显示矩阵按键值，并带有蜂鸣器鸣叫功能，采用c51编写，在51单片机上可以运行-Through the digital display value matrix keys, and sing with a buzzer function, the use of C51 prepared at 51 single-chip can run up
ds1820
- 实现ds18b20的温度显示，lcd液晶显示-temperature display
STC12C5410AD_MCU_PWM_output_procedures_PCA_functio
- STC12C5410AD系列单片机 PCA 功能 PWM 输出程序-STC12C5410AD MCU PWM output procedures PCA function
DS1302
- DS1302时钟芯片制作的电子时钟实例代码 本代码通过DS1302时钟芯片控制产生时钟信号。并且通过24C08记忆时钟计时信息。通过数码管显示出来。是多种芯片的综合应用-DS1302 clock chip production instance of the code of the electronic clock DS1302 clock chip to control the code generated by the clock signal. And the memory clock
kpd
- keypad header file for PIC
usart
- avr单片机串口通讯型号是mage644p-control the serial output of the microcontroller avr, microcontroller model 644p
hue-circle
- 本程序旨在在尽量节约定时器资源的情况下实现三彩LED在饱和度和亮度都为50 时的色相循环 以及包含RGB与HSB互相转换函数的头文件-This program is designed to save as much as possible in the case of timer resources to achieve three-color LED in the saturation and brightness of the hue cycle of 50 and contai
EPROM-Erase-Check
- EPROM Erase Check - Verify erase quality
STC15FEEPROM
- 用于STC15F系列单片机EEPROM的使用-Applicable to the use of STC15F microcontroller EEPROM
DS1302.c
- 使用ds1302基于51单片机制作的电子时钟程序-Using ds1302 based on 51 single-chip electronic clock production process
ds12c887setup
- 时钟芯片ds12c887线片驱动程序，可直接应用
LCD51F
- 说明：本LCD为LCM161（HD44780驱动器）字符显示器. 接线：LCD D0-D8(PIN7-14) 对映用户板P0.0--P0.7 LCD VSS(PIN1) 接 GND,VDD(PIN2)接+5V,LCD驱动电源V0(PIN3)接可调电阻ADJ,调节亮度 LCD寄存器选择RS(PIN4)接P2.0,读写选择R/W(PIN5)接P2.1,使能端EN(PIN6)接P2.2(高电平有效) 本程序采用I/O口模仿总线时序,故无需做任何硬件扩展.屏幕显示:\"welc