资源列表
uart
- UART模块提供了一个全双工标准接口，用于完成SPCE061A与外设之间的串行通讯。借助于IOB口的特殊功能和UART IRQ中断，可以同时完成UART接口的接收发送数据的过程。-Full-duplex UART module provides a standard interface for the completion of SPCE061A and the serial communication between peripherals. With IOB mouth of the spe
ASM
- PWM方式控制直流电机和PWM方式控制LED亮度实验，用89S52单片机控制。-DC Motor Control PWM mode and PWM mode LED brightness control experiment with 89S52 MCU.
1.c
- 51单片机和at24c02储存密码的密码锁，密码对比程序。-51 And at24c02 stored passwords password lock, password comparison program
AT24C01
- 使用at89s52单片机，采用GPIO管脚模拟i2c总线读写AT24c01eeprom.少经改变就可以用于读写AT24Cxx系列的EEPROM。已经用于工程实践，读写AT24C01有效可靠。用于存储一些配置信息，128字节的at24c01是一个很好的选择。模块化的程序，也很容易移植，里面有丰富的注释-Use AT89S52 microcontroller, GPIO pin used to read and write analog i2c bus AT24c01eeprom. Less by
1602LCDXIN
- 这是一个用５１做的用１６０２显示秒表的程式，在家可以参考一下-This is a 51 to do with the 1602 show with a stopwatch program at home for reference
18b20
- 18820的lcd显示，基于89C52，师访所写的代码-18820 of lcd display code written based on the 89C52, division visit
CCP
- CCP标定协议源码，修改后可以移植到项目中使用-CCP calibration protocol source code, it can be used to your project by modified.
zlg7289
- 国产芯片周力功zlg7289驱动程序，可以同时驱动动64个键盘和8位数码管-dirver of zlg7289，64 keyboard and 4*8segment digital led can be drived
12864_lcd
- LCD126*84 驱动例程 (c语言版)-LCD126*84 driver routine
LEDdisplay
- 51控制08接口双色LED -51 control 08 control 08 interface interface LED51 two-color two-color LED
Lao-Yao
- 步进电机控制程序，可调时钟报时程序，1602液晶程序-Stepper motor control program, adjustable clock timekeeping procedures, procedures for 1602 LCD
DA7811
- 基于430的DA7811基础程序，DA7811是TI公司的一款DA芯片。-Procedures based on the basis of 430 DA7811, DA7811 is a DA TI' s chips