资源列表
the-motor-speed-program
- 这是电机测速程序，用于电机测速，适合初学者学习单片机使用。-This is the motor speed program for motor speed, suitable for beginners to learn MCU.
51andpc
- 基于51单片机与上位机通信，窗口通信，便于读者理解串口通信相关知识-Based on 51 MCU to communicate with the host computer, the window communication, to help readers understand the knowledge of serial communication
xunji
- 51单片机智能小车黑线寻迹程序，经过测试，可流畅实现黑线寻迹，小车为左右减速电机控制左右车轮-51 single-chip smart car black found trace program, after testing, smooth and achieve black line tracing, the car is about deceleration motor control left and right wheels
lesson18
- 这是一个基于NRF905的单片机的无线温度监控系统，效果很好-This is a NRF905 based on the single chip microcomputer temperature monitoring system of wireless, the effect is very good
buj
- 步进电机 编程 测试 及数码管转动计数-stepping motor programme testing nixie tube count
STC89C52_Usart
- AT89S52单片机的串口发送与接收程序并附有详细的注释-The AT89S52 microcontroller serial port to send and receive program together with detailed notes
danpianji-fuxiti
- 从内部RAM30H单元开始，有10个单字节数据。试编一个程序，把其中的正数、负数分别送40H和50H开始的内部RAM单元。-Start from internal RAM30H units, 10 single-byte data. A trial program, one of the positive and negative, respectively send 40H and 50H, internal RAM unit....
Pulse-count
- 脉冲计数并通过LCD显示出来的程序，可以用来监测脉冲的个数，比如在进行编码器脉冲的技术等等场合都很实用。-Pulse-counting procedures, and out through the LCD display can be used to monitor the number of pulses, such as during the encoder pulse technology, and so on are very practical.
1602display
- 1602函数对任何从其他表或者数据出口传出的数据进行显示(The 1602 function displays any data that is exported from other tables or data outlets)
ex4_1
- 对独立键盘S2 键的按键次数进行统计，并在与P1 口相连的八个发光二极管上以二进制形式显示出来。（判断是否按下键盘，当单片机上电时所有IO 口为高电平，S2 键一端接地另一端接P3.4，所以当键被按下时P3.4 口直接接地，此时检测P3.4 肯定为低电平。）-S2 of independent keyboard keystrokes key statistics, and in the eight light-emitting diodes are connected with the P1 p
test
- 一个基于STC89C52的单片机程序，可以通过按键来不停发送100ms（时间可调）的脉冲，通过定时器控制
MSP430-1602
- MSP430驱动1602程序（c语言）.-MSP430