资源列表
printf-DA-key
- 数据采集显示,AD显示,按键控制显示,基于c编写-date keyboard printf
PIC_DOOR2
- 這是用MICROCHIP PIC做的可控制三相或單相感應馬達正反轉作為大門開啟用
ADC0809-PWM
- AT89S52控制ADC0809输出PWM波,占空比可调,可用此控制电机转速。文件内含proteus仿真图,在KEILC环境下编译-PWM output control ADC0809 AT89S52 wave, duty cycle adjustable, can use this to control the motor speed. Proteus simulation file containing maps, compiled under the KEILC
chuankoujieshou
- 51单片机的串口收发通信,已在开发板上验证,可直接使用,欢迎下载-Send and receive serial communication microcontroller 51, has been tested in the development board, can be used directly, welcome to download.
shiyan8_IRQ4
- 开发环境:unSP IDE 2.0.0 实验目的: 1)了解IRQ4的中断向量和中断源。 2)掌握中断控制单元P_INT_Ctrl, P_INT_Clear的设置方法。 3)熟悉中断的编程方法。 实验设备: 1)装有µ ’nSP™ IDE仿真环境的PC机一台。 2)µ ’nSP™ 十六位单片机实验箱一个。 实验原理: IRQ4 中断对应4096Hz、2048Hz、1024Hz 中断源,通过写P_INT_Ctrl来设置中
应用锯形波的精密波形转换器
- 应用实际工程项目中的程序,能为开发相关内容的工程人员提供一定的参考-practical application of engineering projects in the procedures related to the development of the engineering staff as a reference for
I2C1
- AVR单片机I2C程序,可以实现AVR单片机对At24C64的读写,内有完整工程文件。-The AVR microcontroller I2C procedure, AVR microcontroller to read and write on At24C64 can be achieved within the complete project file.
GPSX-DD
- 车载项目的单片机程序,熟悉的一看就知道,程序已用于具体项目,单片机+SIM300+GPS。简单修改一下就是另一款产品。-The vehicle project SCM procedures, familiar to see that, the program has been used for specific projects, microcontroller+SIM300+GPS. Simple modification is related to another.
jiandankongzhi
- 在单片机上面实现简单按键控制数码管显示,里面含有电路原理图。-In the SCM control buttons above the simple digital display, which contains the circuit schematic.
51-serial-port-circuit-in-model-1
- 使用两个51单片机,利用串口进行双机通信,接收对方传来的数据,并及时显示。对于51单片机串口的学习及开发,有一定的辅导作用,提供KEIL及PROTEUS仿真文件,装有PROTEUS的话,可以直接运行,-Use two 51 single, two-machine communication using the serial port, receive data from the other side, and promptly displayed. For the 51 single-chip
4
- 温湿度控制程序 自己编写 调试成功 大家可以-Temperature and humidity control program written to debug their success we can see
51mcuforyitai
- 51单片机用于以太网的资料 51单片机用于以太网的资料-51 SCM 51 SCM information for the Ethernet data to Ethernet
