资源列表
lcd
- 320*240驱动程序，RA8835控制器，希望对 大家有点帮助-320* 240 driver, RA8835 controller, hope we are a bit to help
s_M
- 这是一个基于STC89C51的串行通行程序，可与主机进行通信-This is a common procedure based on serial STC89C51 can communicate with the host
intrins
- 单片机汇编c混编函数头文件 单片机汇编c混编函数头文件-Mixed function MCU assembly c header file
TIMEER0
- 51单片机中断程序，timer0 可作为初学者学习中断的参考-51 single interrupt procedure, timer0 interrupt can be used as a reference for beginners to learn
1602
- 用1602显示的秒表，支持按键修改成当前时间。-The stopwatch display with 1602, support key changes to the current time.
SCMGTX-lesson9
- 单片机相关例程，郭天祥十天学会单片机第9课例程-SCM related routines, Guo Tianxiang ten days the first lesson learned routines microcontroller
3.3
- 调节舵机使之转动5个角度 0 45 90 135 180 PWM信号周期为20ms。程序流程是：开机时舵机角度自动转为0度，按下 P3.7则转到45度，以后就根据两个按键的按下而转动。控制高电平的持续时间即可控制舵机停止制动的角度，0.5ms-0度 1-45 1.5-90 2-135 2.5-180 。-Adjust the steering gear so that rotation angle of 5 0 45 90 135 180 PWM signal period is 20ms. T
3
- 实验板中高两位和低两位数码管为两个独立计数器，利用键盘的两行按键通过外部中断方式分别控制它们的计数。每行选用三个按键分别作为一个计数器的启动、暂停、清0控制键。-High two and low-experimental board two digital tube into two independent counter, two rows of the keyboard keys by external interrupt, respectively, to control their co
crc
- CRC校验，CRC16，方便的CRC函数，封装好-CRC checksum, CRC16, convenient CRC function, package
main
- 此文件为继电器源代码（keil软件运行）-This file is a relay source code (c51 software running)
24C02
- EEPROM芯片24C02 C语言驱动源程序，可经修改管脚定义直接驱动使用-EEPROM chip 24C02 C language driver source code can be directly drive the use of revised pin definitions
qudong74hc164
- 74hc164的驱动程序,很适用于初学着