资源列表
DS1302time
- 基于单片机开发的时钟编程，主要DS1302与LCD1602-Clock based on microcontroller development programming, DS1302 and LCD1602
COUNTER_8.0
- 两路PWM脉冲计数，A路通过中断，中断时候扫描B路，从而确定相位-Two PWM pulse count, A way through the interruption, disruption of B when the scan path in order to determine the phase
LedAndMusic
- 基于凌阳SPCE061板的语音函数库与API函数开发的带音乐跑马灯。-Sunplus SPCE061 board based on the voice library and the API function with the development of music Marquee.
MCU-IO-simulate-the-PS2-protocol
- 用单片机普通的I/O脚（非中断）模拟PS2协议，通过引脚的的拉高和拉低来读取按键的时序，从而读出键值并且把读出的键值显示到1602液晶显示屏上,并且按键时蜂鸣器会响-Ordinary MCU I/O foot (not interrupt) to simulate the PS2 protocol, through the pins of the sequence of up and down to read the buttons, to read out the key value and
L297-L298
- L297 L298中文资料说明-L297 L298 Chinese Memo walawalawala
MX7541
- MAX7541的详细资料，和单片机的连接和程序。-The details of the MAX7541, and single-chip connections and procedures.
OlympicTimerLed
- 功能：实现奥运倒计时显示和当前时间显示 硬件平台：AVR-51开发板-Function: to achieve the Olympic countdown display and the current time display hardware platform: AVR-51 development board
digital_voltmeter_design
- 数字电压表设计，单片机AT89S51与ADC0809设计，能够测量0－5V之间的直流电压值，四位数码显示。完整的C语言代码和电路图
LEE_Test_FOSC
- PIC18F25K80 单片机时钟配置源码 仅供参考-PIC18F25K80 MCU clock configuration source For reference only
Blinky
- led blinking example with pic24fj256ga110
RS232
- 使用MSP430F149与电脑的RS232的串口通信，一定能通过-the communication of RS232 bitween computer and MSP430f149
11111
- 步进电动机是纯粹的数字控制电动机，它将电脉冲信号转变为角位移，即给一个脉冲，步进电机就转一个角度，因此非常合适单片机控制，在非超载的情况下，电机的转速、停止的位置只取决于脉冲信号的频率和脉冲数，而不受负载变化的影响，电机则转过一个步距角，同时步进电机只有周期性的无累积误差，精度高。