资源列表
tlv5619
- msp430应用tlv5619进行DA转换-msp430 application tlv5619 for DA conversion
qiang_da
- 八路抢答器。带proteus仿真，检验能用-Eight way responder. With Proteus simulation, test can be used
TFT_2
- 这个是基于MSP430单片机驱动3.2寸TFT触摸屏的驱动及一些显示函数，如打点 画线 ，显示ASCII字符等函数-This is based on the MSP430 MCU-driven 3.2-inch TFT touch screen display functions and some drivers, such as drawing a line dot display ASCII characters and other functions
74hc595_51
- 基于74HC595的LED点阵屏驱动程序-Based on the 74HC595 LED dot matrix display driver
3
- 此程序实现了c8051f340单片机结合摄像头进行使用，并通过串口将图片信息上传给上位机-This program achieved c8051f340 microcomputer with the camera for use, and the image information is uploaded via the serial port to the host computer
screenmearuringUseC51
- 用C51系列单片机设计物体分级设备的测量光幕-C51 series of single-chip design using object classification screens measuring equipment
STC15
- 文件中是STC15单片机的源代码，一共有两个，一个是用定时器1产生PWM，另一个是利用串口2发送数据-File is STC15 microcontroller source code, there are two, one is to use the timer 1 to generate PWM, another is to use a serial port to send data 2
DPJ
- 单片机做的程序，功率计的。。有效果图和源程序，自己应用于实际中的，很实用的-Single-chip to do the procedure, the power meter. . Effective plans and source code that they used in practice, it is practical. .
BCD
- 将BCD码的转换为四位二进制,实现是一个十线输入,四线输出的转换功能-BCD code will be converted to four binary to achieve is a 10 line inputs, four-lane conversion output
STM8-TIM1-TI1
- 如何配置使用STM8单片机的外部时钟模式1，对TIM1_CH1通道的外部时钟上升沿计数，每来一个上升沿时钟，计数器时基加1-How to configure the use of STM8 microcontroller external clock mode 1, the TIM1_CH1 channel external clock rising edge count, each to a rising edge of the clock, the counter time base plu
VITTO
- Legic卡是比目前MIFARE更安全的智能卡。有关LEGIC门禁的资料目前比较少，本次上传的是其中一个产品的资料，对于进行门禁二次开发者来说应该有帮助-Legic MIFARE card is more secure than current smart cards. LEGIC access information about the relatively small, this is one of the uploaded product information, access to th
XS-3K-V1.05
- 带字库的12864液晶屏程序、带按键操作、LED指示工作状态-12864 LCD procedures with a character With keystrokes LED indicator working condition