资源列表
kaijicishujishu
- stc公司生产的51单片机程序 可以记录开关机的次数-51 MCU program can record the number of switching machines
cpsl
- 模拟工厂里的产品扫描计数器。 用TX-1C学习板上的S2和S3键。 其中S2用于模拟代替扫描开关，当有产品经过时，会使S2送出低电平（本程序中是用手按下S2来模拟） S2每按一下，便会使数码管上的计数器加一。 S3用于对计数清零。-Analog products factory scan counter. TX-1C learning panel S2 and S3 key. Where S2 for analog instead of scanning swit
01-LPLD_HelloWorld
- 拉普兰德K60库，其中一个例程，这真是极好的啊啊啊啊啊。-It is soooooooo good.
C51__1602
- C51驱动1602液晶屏，是静态显示。我自己在KEIL软件里调试过了。-C51 1602 LCD driver, is a static display. KEIL software in my own debugging before.
LCD_Control
- msp430G2553单片机控制LCD的显示-msp430G2553 microcontroller to control LCD display
traffic-light
- 交通灯红，绿，黄三色的单片机控制系统，适合初学者学习和模仿，代码简单易读有注释-Traffic light red, green, and yellow single-chip control system, suitable for beginners to learn and imitate, the code is easy to read the Notes
AD7843chumoping
- 用AD7843编的程序,也可适用AD7846.经测试过可以用的-with AD7843 addendum to the procedures, applicable AD7846. Can be tested by the
该程序是将读到的IC卡卡号转换成韦根26代码进行输出
- 该程序是将读到的IC卡卡号转换成韦根26代码进行输出。读卡芯片采用的是飞利浦公司的Mf500,单片机采用的是atmel公司的atmeg8，开发环境是windows下的ICC开发系统。,The program is to read the IC card number into the output code Wiegand 26. Chip card reader is used in Philips Mf500, single-chip microcomputer is used in atm
timer
- AVR 9Atmega8) Timer demo
232Serial-transmit-array
- CPU使用89C52。该程序实现将数组里面的数据连续发送到串口（RS232)显示。非常好用，值得大家下载。-CPU usage 89C52. The process to achieve continuous data inside the array is sent to the serial port (RS232) display. Very easy to use, worth downloading.
99Second
- 延时并显示99秒的C51程序,从0计数到99再减计数到0-99 seconds delay and display the C51 program counts from 0 to 99 minus count to 0
PIC16F1933
- PIC16F1933单片机程序，包括AD转换、RS232\485、SPI接口、看门狗定时器等。-PIC16F1933 singlechip procedures, including the AD conversion, RS232\485, SPI interface, watchdog timer, etc.