资源列表
ad1602
- stc12c5a60s2内部AD模块的使用。从IO口采集模拟量转换成数字量，在1602液晶上显示。-stc12c5a60s2 internal AD modules are used. Collected from the IO port analog into digital, LCD display in 1602.
test2-2
- 本程序用来演示定时器0和定时器1的工作 定时器0定时1s 定时器1定时0.5s 分别按这个两个时为间隔在两个数码管上显示0~F-This procedure is used to demonstrate Timer 0 and Timer 1 Timer 0 Timer 1s the work of a regular 0.5s timer respectively when the two intervals in the two digital tube display 0 ~
12864
- AT89C51控制12864点阵液晶，使其显示图片和字符。-12864 AT89C51 control of dot matrix LCD, to display images and characters.
8X8dot-test
- 基于KEIL的单片机编程，8X8点阵与学习系统，方便学习了解-based on the system keil,with the 8X8 dots rectanglar,it s brings the convenience to other friends
led
- 51单片机例程 LED 适用初学者 C语言写的-51 LED PROGRAMER
ARM_CPU
- 从8位/16位单片机发展到以ARM CPU核为代表的32位嵌入式处理器，嵌入式操作系统将替代传统的由手工编制的监控程序或调度程序，成为重要的基础组件-from 8 / 16 to a microcontroller development of nuclear ARM CPU to 32 representatives of the Embedded Processor Embedded operating system will replace the traditional manual p
janpanzhongduan
- 飞思卡尔GP32单片机键盘接口的变成，带注释的远程序！是个学习飞思卡尔的单片机的好资料
keyboardP-
- 单个独立按键控制led输出状态 按下加按键，数值增加直到最大值，按减按键，数值减小，直到最小值-Independent control of a single button press the plus button led output state, the value increased until the maximum, according to cut key, value decreases until the minimum
433
- 本代码是基于STC89C52的433无线模块的使用，实现了短距离的无线控制。-This code is based on the wireless module 433 STC89C52 used to achieve a short-range wireless control.
choushui
- 抽水机程序，采用HT46R47 可自动检测水压，流水，水满等情况来判断电机是否运行；
16-LCD1602
- lcd1602 显示 工程文件 51单片机-Lcd1602 display engineering documents 51 SCM
avr_LED
- avr单片机，采用c语言编写，实现LED小灯循环闪亮-avr microcontroller, c language, the LED lights cycle shiny