资源列表
ad-lyang
- 通过改变LINE_IN端口的模拟电压来改变IOB口输出的数据，采用读取P_ADC_MUX_Ctrl寄存器启动ADC转换，可以通过发光二极管的点亮了解转换的数据值。可以作为初学者入门的小程序.-LINE_IN port by changing the simulation to change the voltage output IOB population data, Register used to read P_ADC_MUX_Ctrl start ADC conversion, throu
source code for AT89C51
- 单片机89c51对usb操作的全过程,初始化，读写-SCM 89c51 right usb operate the entire process, initialization, reading and writing
timer2
- 此程序利用汇编语言实现定时器及计数器的应用，目的为：1.熟悉 8051 的 T0 作为定时器的设置及使用方法；2.掌握 T0 作为计数器的软件设计方法。-This program makes use of assembly language to achieve the application of timer and counter
C
- c语言，利用外部中断控制波形的开启与关闭-C language, use external interruption, control of the waveform opened and closed
My_EE4_Project
- PIC18F2553 include:18f2553.lkr pwm_process.c adc_process.c config.c main.c-PIC18F2553 include:18f2553.lkr pwm_process.c adc_process.c config.c main.c
klk
- mcu 全数字化 信号发生器设计制作 精度0.5hz max 300MHZ-mcu full-digital signal generator designed to produce precision 0.5hz max 300MHZ
47-bujindianji-
- 1、本程序用于测试4相步进电机常规驱动 2、需要用跳帽或者杜邦线把信号输出端和对应的步进电机信号输入端连接起来 3、速度不可以调节的过快，不然就没有力矩转动了 4、按s4（设置成独立按键模式）可以控制正反转 -1, the procedure used to test the conventional 4-phase stepper motor driver 2, need to use DuPont wire jumper or the signal output and
SteppingMotor
- 步进电机驱动源代码，实现了步进电机的正转，反转及停止等功能。-Stepper motor driver source code
update
- code for Arm 9 to download new flash run code over internet to update code while running
LCD12864
- AVR单片机控制LCD128641602B基本驱动函数库-AVR control LCD128641602B driver library
MSP430F149_h-explain
- MSP430单片机中，型号为MSP430f149单片机头文件详细解释。-MSP430 microcontroller, model MSP430f149 microcontroller header file detailed explanation.
first-LED
- 单片机点亮第一个发光二极管,单片机采用STC51型单片机，一些新手入门的简单程序分享-SCM lit the first light emitting diode