资源列表
main
- 只能车控制主程序，控制各种硬件，单片机为飞斯卡尔9s12-Vehicles can only control the main program to control a variety of hardware, microcontroller Scalfaro to fly 9s12
nRF24L01
- 基于Cortex-M3的nRF24L01驱动程序，使用中断通信，可参考，发送部分也应利用该思想采用中断处理。仅使用1层FIFO-Cortex-M3-based nRF24L01 drivers use interrupt communications, can refer to, send some thought should also be used by the interrupt handling. Use only one layer of FIFO
LCD4.11
- 这里面是st7529应用实例，基本能把屏点亮，其他的功能还需要再开发
C8051F340单片机实现的MODBUS
- 用新华龙的C8051F340单片机，实现的MODBUS RTU协议通信程序,New hualong the C8051F340 microcontroller, implementation of the MODBUS RTU protocol communication procedures
12232drive
- 自己写的12232液晶驱动。实际项目中大量使用，估计不少朋友都会用到。-12232 wrote it myself liquid crystal drive. Large-scale use of the actual project, it is estimated that many of my friends will be used.
keyboard_check
- 本程序用于键盘的识别，通过编程，使按下K1键时第一个数码管显示1，按下K2键时第一 //个数码管上显示2，按下K3键时第一个数码管上显示3，按下K4键时第一个数码管上显示4， //对键盘的扫描采用查询方式
PWM
- 开发环境MPLAB。实现pic12F683单片机的PWM波的发送-Development environment, MPLAB. Achieve pic12F683 MCU PWM wave sent
LM2088R_RA8806_check)
- LM2088R RA8806 TP Demo, LM2088R RA8806 TP Demo-LM2088R RA8806 TP Demo,LM2088R RA8806 TP Demo,LM2088R RA8806 TP Demo
THERMO
- Thermometer using C-Thermometer using C++
STC12C5204AD-ADC
- STC12C5204AD ADC 单片机adc-STC12C5204AD ADC
QT-finishing-transplant-error
- QT移植到RAM板过程中遇到的一些报错的处理-QT transplanted some error handling encountered during the RAM board
sms1613_c51
- 太阳人液晶屏sms1613的演示程式，C51编写。-Sunman LCD sms1613 demonstration program, C51 write.