资源列表
signal_controller
- 基于51的交通信号灯控制程序，具备了信号灯要求的所有功能如数字倒计时、色条倒计时、闪烁提醒等。-based on 51 traffic lights control procedures, with the lights all the required functions such as digital countdown, the color of the countdown, the flashing reminders.
fan
- 以 BASCOM 編寫的控制風扇的程式,可以改善省電效益-BASCOM prepared to control the fan program, can improve power efficiency
xwj_fk
- 俄罗斯方块程序 ： 1、功能完整，直接使用 2、模块独立性强，移植方便，外部仅init和move函数，修改显示和输入即可 3、对减少内存占用、尽量减少屏幕操作进行适当优化 4、新方块生成高度随机，绝对无规律-Tetris procedure: 1, full-featured, direct uses 2 modules more independent, transplant easily, external only init and move functions, modif
Tanchishe2
- atmega16，8*8点阵，贪吃蛇游戏，用链表做的，没有用数组做，链表做效率很高，但资源很浪费了，因为用了很多指针。-atmega16, 8* 8 dot matrix, Snake game, with the list do not use an array to do lists as efficient, but the resources are wasted, because with a lot of pointers.
ds1305
- This DS1305 clock chip program code, the written in c.The SCM, can achieve very useful for beginners, years of programming-This is DS1305 clock chip program code, the written in c.The SCM, can achieve very useful for beginners, years of programming
AVR12864LCD
- atmega16下的12864LCD显示程序，包括字符和图形的显示-atmega16 under 12864LCD display procedures, including character and graphic display
whole-point-clock
- 基于单片机的 带参数存储的整点报时音乐电脑时钟程序和解释-The whole point of time with parameters stored in the music computer clock
DR-1
- 单片机音频信号处理软件1.-SCM audio signal processing software 1.
stm32_adc
- 此程序是基于STM32的AD应用程序，我们在这里设置ADC为连续转换模式，常规转换序列中有两路转换通道，分别是ADC_CH10(PC0)和ADC_CH16(片内温度传感器)。因为使用了自动多通道转换，数据的取出工作最适合使用DMA方式取出，so，我们在内存里开辟了一个u16 AD_Value[2]数组，并设置了相应的DMA模块，使ADC在每个通道转换结束后启动DMA传输，其缓冲区数据量为2个HalfWord，使两路通道的转换结果自动的分别落到AD_Value[0]和AD_Value[1]中。
24L01-drive-program
- 基于2.4G模块的24L01驱动程序,无线发射与接收-24L01 drive program
dianjicesu1
- 单片机开发程序，用以直流电机测速，并把所得值在七段数码管上显示出来。-MCU development process for the DC machine guns, and the values obtained in paragraph 107 of digital tube displayed.
ex90
- 是用DS18B20单总线温度传感器检测温度并在液晶显示器上显示的源程序。-Is a single-bus temperature sensor DS18B20 temperature detection and LCD display of the source.