资源列表
ben1
- 利用c51单片机的定时计数模块进行实现的设置时间到点蜂鸣功能的程序-use c51 SCM regularly counting module to achieve the set time to witness the faint buzzing functional procedures
wenducontrol
- 温度控制系统，P0口作为连接LCD显示屏，可以实现温度的测量，控制。在程序中有详细的注释。
sjc3a
- 功能： 1、作为主机通讯采集两路下位机数据并将此数据通过8255送出（十路水位值） 并计算水头送STC板 2、采集数据为BCD码制，先转换成二进制，处理后再转换成BCD 3、通讯采用方式3，多机通讯，上位机发地址时TB8=1，其他TB8=0 下位机SM2=1，RB8=1时产生中断后使SM2=0收发数据，结束后SM2=1 在此系统中本机硬件地址要设为0-Features: 1, as the host of two-way communication acquisit
75448145PID
- 模糊pID控制的典型程序，欢迎指正-PID fuzzy
IIC
- 标准80C51单片机模拟I2C总线的主机程序.根据PHILIPS I2C总线协议编写。
004_ARMMode
- IDE程序\Software\S3CEV40\004_ARMMode.rar-IDE procedures \ Software \ S3CEV40 \ 004_ARMMode.rar
msp430_flash
- msp430对片外flash的读写程序，不同外设是电路有所差别，供参考。-msp430 read and write on-chip flash program, different circuits have different peripherals are available for reference.
GPRS-communication
- 单片机STC12C5412AD控制的GPRS通讯程序；液晶：1602；button control；button check-GPRS communication；LCD1602；button control；button check
eic_example2
- EVK1101板外部中断实验2，类似型号可以参考。-EVK1101 board external interrupt experiment 2, a similar model can refer to.
51TXTR
- 智能电动小车下位机控制源程序，基于51单片机的源程序-Smart electric car under position control source, based on 51 single source
Pump-ver1.0.bas
- This app, written in BASCOM (an embeded BASIC for atmel board MyAVR) is entended to drive an electric pump through a double push push power stage. It works fine with an ATMega 8, but it can be used to design new soft to control anything you want
digital-voltage
- 基于at89c51单片机的数字电压表的设计程序。-Based on singlechip digital voltage meter procedures