资源列表
VI2C_24A
- 本模拟I2C软件包包含了I2C操作的底层子程序，使用前要定义 好SCL和SDA。在标准8051模式(12 Clock)下,对主频要求是不高于12MHz(即1个 机器周期1us) 若Fosc>12MHz则要增加相应的NOP指令数。(总线时序符合I2C标 准模式,100Kbit/S)-simulation package contains the I2C operation of the bottom subroutine, prior to the use of a goo
dotLEDdisplay
- 实现汉字在点阵LED上显示，以及时间与温度的采集·
qcyk
- 用于汽车遥控的Ev1527的pic单片机软件接收解码程序，密码采用I2C总线方式存在EEPROM中
KeilC51_I2C_Virtual
- 在89C51是用IO口模拟出I2C的主机操作的程序。源文件从ZLGMCU。COM上下载而得。-the 89C51 is IO simulated I2C mainframe operating procedures. Source documents from ZLGMCU. COM download derived.
CS5532.rar
- 24位高精度AD芯片CS5532的51驱动程序，包括校准、单次采集和连续采集。,AD precision 24-bit chip CS5532 driver 51, including the calibration, one-time acquisition and continuous acquisition.
stc_AD
- STC12C5A60S2单片机AD转换程序，LCD1602显示结果！通过STC单片机自带的AD转换器，测量模拟信号，通过ADC之后，LCD显示结果。-STC12C5A60S2 single-chip AD conversion process, the LCD1602 display the results! Comes through the STC SCM AD converter, measuring an analog signal by an ADC after the LCD dis
cbr
- program for CBR traffic using ns2
MP3
- MP3的C程序，对学习用C51学习MP3有写帮助-MP3 of the C program, to learn to write with C51 to help with learning MP3
adc_example
- EVK1101板的ADC训练,比较实用。-Training of the EVK1101 board of ADC, more practical.
I2C_LM75A
- stm8s LM75驱动程序模拟IIc，移植方便可直接使用-stm8s LM75
F12x_UART0_Interrupt
- C8051F120 的串口硬件寄存器配置 及读写操作-This program demonstrates how to configure the C8051F120 to write to and read from the UART interface. The program reads a word using the UART0 interrupts and outputs that word to the screen, with all characters in up
ADC-n-channel
- MSP430 多通道 ADC采样，并通过usart 与PC端收发数据-MSP430 n-channel adc, usart