资源列表
RP89com3
- 采用P89CXX编程器控制CPU接收和控制程序，简单实用。-P89CXX programming device used to control the CPU to receive and control procedures, simple and practical.
shuzidianzizhong
- 用 AT89C51、LED 数码管、按键、二极管等部分构成，能实现时钟日历的功能：能进行时、分的显示。也具有时钟，定时时间的设定，实现三路开关定时输出等功能。
2010.1.2shixianjieshou
- MSP430F1611的接收程序，CC1101寄存器的配置，接收程序等。-MSP430F1611 the receiving process, CC1101 configuration registers to receive procedures.
QS_watchdog
- Generic software watchdog. (It is not a watchdog monitoring to reset, but just a programmable function call...) Written for dsPIC30F.
6301
- 原车专用有源探头倒车雷达程序，时间转换精确，加探头自检功能-video driver
cdf
- Guidance for IEEE power system
ledtm
- 这是一台自动测LED的程序，分三个部分TMA TM TMD，基本上单片 机的功能应用都 在上面了-This is a SCR circuit board auto-detection machines, because the SCR power voltage is less than 3V, and power-perishable, so set this machine test
ACM-12864-LCD-driver
- 基于51单片机的ACM-12864汉子液晶显示驱动程序-Based on 51 SCM man ACM-12864 LCD driver
main
- 基于arm的stm32例程，步进电机（四相双极性）-Stm32 routines based arm of the stepping motor (four-phase bipolar)
XS128---chengxusheji
- 这是一个飞思卡尔摄像头的程序，基本能够按照比赛要求达到标准的赛程。-This is a fly think of Carle camera program, can according to the competition required to achieve the standard schedule.
1602
- lcd1602测试程序，包括写数据写指令，很方便移植-lcd1602 test program, including the write data write instruction, it is convenient transplant
clockdingshi
- 该例程为数码管显示可调且可定时钟表，注意晶振需为11.0592M。 若为其他数值晶振，请合理改变TH0与TL0参数值，否则计时会有很大误差 。-The routine for the digital display is adjustable and can be timed watches, crystal need to pay attention to 11.0592M. For other values crystal, please change the