资源列表
gt911
- 本程序为完整的用GT911芯片设计的触摸屏程序，可以供开始设计触摸屏的一个很好的参考，值的收藏-This program is complete with the GT911 chip design touch screen program, you can begin to design a touch screen for a good reference value of the collection
gai3
- ad7705的51程序，可以用来驱动ad7705，非常方便-ad7705 51 procedures can be used to drive ad7705, very convenient
HT1621
- 笔段式液晶程序，HT1621芯片驱动，根据自己的液晶进行数字建模，完美驱动，使用需更改建模数据-Pen Segment LCD procedures, HT1621 chipset driver, according to their own LCD digital modeling, perfect drive, use the need to change the data for modeling
Graduate
- 通过无线控制步进电机，控制智能小车的正转、反转、左转弯、右转弯。转弯是通过速度差实现的。-Through wireless control stepper motors, controlled smart car forward, reverse, turn left, turn right. Turning is achieved by the speed differential.
nokia5110
- 这是在arduino上使用nokia5110液晶显示屏的程序-It is used on the arduino program nokia5110 LCD
STC15_MAX7219_Display
- STC15系列单片机驱动MAX7219显示电路的源码-STC15 series single-chip driver source code display circuit MAX7219
pwm_driver
- 使用stm32f373控制，产生多路PWM，可以用来控制灯的渐亮和渐灭。-Use stm32f373 control, produce the multiplex PWM, can be used to control the light was coming on and destroyed gradually.
STM32f103-
- STM32f1o3单片机输出四路互补的PWM波形子程序，可作为电机控制及全桥开关电源的开关管驱动，程序已经示波器调试通过-STM32f103 microcontroller, four road complementary PWM waveform output can be used as a motor control and the whole bridge switching power supply switch tube driver
MSP430G2553-4IO1602
- 主要用于MSP430G2553单片机四线方式驱动1602液晶，因为G2553 IO口有限，所以用起来很方便，本程序亲测完全好用。-Mainly used for four-wire microcontroller driven MSP430G2553 1602, because G2553 IO port is limited, so it is very convenient to use, the program pro-test is completely easy to use.
STM8S105.c
- 是一个从51单片机移植到STM8S105单片机上的学习型红外遥控器程序-SCM is a transplant from 51 STM8S105 microcontroller learning infrared remote control program
MSP430G2553_UART_ADC_Timer
- MSP430G2553的代码，可给430G2X系列参考，有ADC10多通道多次采样，TIMER定时中断，TIMER的PWM输出，UART的初始化、ASCII码输出、接收中断。 特别是ADC10的多通道多次采样，很多同学刚开始学430不会用，一定记得要用数组接收数据，代码中用的ADC[0~4]接收的数据。 用ADC多通道多次采样，特别需要注意的是，如果你要采集通道 4 5 6 7（也就是P1.4~7），你还是得设置ADC10DTC1=8；，如果设置成4就会错误。 但是可以 ADC10AE0|=BI
main_yaokong
- 基于msp430f149单片机的遥控小车设计程序，小车使用遥控器为普通编码电视遥控器。-Msp430f149 microcontroller based remote control car design program, car using the remote control for the TV remote control common coding.