资源列表
8x8LED
- 在8X8 LED点阵上显示柱形，让其先从左到右平滑移动三次，其次从右到左平滑移动三次，再次从上到下平滑移动三次，最后从下到上平滑移动三次，如此循环下去。
8255
- 利用单片机控制的8255键盘控制实验汇编成序
MPS430_AD_TE
- MPS430 温度转换程序,测试硬件传感器性能-MPS430 temperature conversion process, testing the performance of the hardware sensors
lcdqudong
- 这是一段lcd驱动HT1621的PIC单片机源代码，是我师兄编写的，我还没看，功能不能细说了。-This is a lcd driver HT1621 single-chip microcomputer of the PIC source code, prepared by my brother, I have not, the function can not elaborate on this.
USART
- rs232通信程序 可以发送和接收数据 只需写入相应数据即可 已通过调试-rs232 have been used
STC12C5408AD
- STC12C5408ad的AD转换程序，已经成功调试了。。。里面还可以通过串口来发送检视-STC12C5408ad the AD conversion process, have successfully debugged. . . Which can also be sent through the serial port to view ...
MPS
- 快速成型软件，具有很好的兼容性，容易操作-Rapid prototyping software, has good compatibility, easy to operate
chuankou
- PIC单片机的串口通讯程序，带CRC16校验的串口通讯程序。-PIC microcontroller serial communication program, with the CRC16 checksum of the serial communication program.
TIME2
- 利用ＰＩＣ单片机编程来实现ＴＩＭＥ２的控制。-Using PIC microcontroller programming to achieve TIME2 control.
KEY
- STM32的按键程序，可检测状态及按下边沿-STM32 key procedures, can detect the state and press the edge
lcd
- 利用LCD显示频率，按键控制步进0.1M-Using the LCD display frequency, key control step 0.1M
msp430g2xx3_dco_calib
- 在P2.0端口设置缓冲区辅助时钟，在P1.4默认子时钟（数控时钟振荡器），在P1.1上设置为主时钟的1/10，DCO is software selectable to 1, 8, 12, or 16Mhz using calibration contstants in INFOA.-Buffer ACLK on P2.0, default SMCLK(DCO) on P1.4 and MCLK/10 on // P1.1. DCO is software selectable to