资源列表
RF433Mjieshou
- 本程序基于RF433M无线数传模块，利用STC51单片机进行无线数传，并用单片机处理输出用于控制动作。-This procedure RF433M based wireless module, using STC51 single-chip wireless data transmission, and treatment with single-chip output is used to control movements.
shuzidianyabiao
- 数字电压表的程序代码 可能对大家会有用的 具有一定的参考价值-Digital voltage meter program code might be used in a certain reference value
CH451FMQ
- DMAVR-M16的蜂鸣器发声示例程序 编译环境 AVR Studio 4.13/AVR GCC -DMAVR-M16 of the buzzer audible environment compiled sample program AVR Studio 4.13/AVR GCC
RTC
- 周立功FM3130芯片的时钟部分的读写程序，经过调试已成功！-Week Ligong FM3130 chip clock part of the reading and writing process, after debugging has successfully!
paintcyln
- Computes the amount of paint needed to cover a number of cylindrical tanks. The inputs are the tank diameter, tank length, number of tanks, and the coverage area of the paint. Output is the amount of paint in gallons needed.
system
- 汇编实现51单片机串行通信，全双工互传计时时间和AD数据采集结果，实现实时检测，没有延迟-Compilation of achieving 51 MCU serial communications, full-duplex transmission each time the results of time and the AD data acquisition to achieve real-time detection, there is no delay
8535
- AT90S8535单片机集成了8通道10位逐次逼近型A/D转换。ADC对模拟信号经行采样，并将结果显示在数码管上。-AT90S8535 microcontroller integrated 8-channel 10-bit successive approximation A/D conversion. ADC samples the analog signal through the line and displays the results in the digital pipe.
moto_PWM
- 基于C8051F040单片机的PWM调节，占空比可以任意调节，非常好用-C8051F040 PWM
EXERCISE_5_MAX187_2
- MAX187 AD转换芯片的单片机驱动程序，数字量显示在8段段式液晶上。-MAX187 AD converter chip microcontroller drivers, digital LCD display on the stage at 8.
TMR0
- 本程序实现用TMR0定时N毫秒。 入口参数：定时毫秒数在SOU中。 出口参数：无。 占用资源：W,STATUS,TMR0,PORTD,024H,028H,029H,07FH,17FH,07EH,1重堆栈。- TMR0 timer with the program to achieve N milliseconds. Entrance parameters: time in milliseconds in the SOU. Export parameter
main
- 秒表-两按键,1按键开始/停止,2按键回零,六位数码管显示-Second clock Display
time-clk
- 1602lcd time clock,初学者可以一起共同学习参考参考-it is a driver for 1602lcd and act as a time clock !