资源列表
ht1621.mywork
- 液晶驱动芯片ht1621的测试程序,采用汇编语言-LCD driver chips ht1621 testing procedures, using assembly language
seriescommunication
- 两个单片机之间的串口通讯，用Ｃ语言实现的，一次发送三个字节，包括参数标号，参数值和校验码，波特率用的是９６００，成功率很高．-between the two microcontroller serial communication with the C language, one byte sent three, including the labeling parameters, Calibration values of the parameters and codes, the baud
9263_boot
- atmel arm 9293的内部Boot ROM部分代码反汇编及解析
time
- 用定时器0的方式1实现第一个发光二极管以 200ms间隔闪烁，用定时器1的方式1实现数码 管的前两位59S循环计时 -Timer 0 Mode 1 with the realization of the first flashing light-emitting diodes to 200ms intervals, with the Timer 1 mode 1 for the digital control loop time of the first two 59S
uart
- 器件参数：ATMega16/32，内部8.0000Mhz 实现功能：ATMega16与电脑串行通讯-ATMega16 and computer serial communication
cal_fun
- 采用简单的线性内插方式，实现在有序数列中查找对应点，常用于外部AD采集获得的数据列表查询，提高精度，本程序提供良好的函数接口和一些基本函数供用户使用。-Using simple linear interpolation, and find the corresponding points in the sequential number column, to obtain a list of data on external AD acquisition commonly used query,
serial-port-communication
- 这个是单片机的串行口通信程序，并且可以通过lcd1602显示模块把通信的内容显示出来-this is the serial part communication and lcd1602 program.It can show the data of serial part communication with the way of lcd1602.
DISPROM
- 自动存包柜的几个功能模块程序。有动态、固定内容的显示，条形码的打印，LCD显示等。-Automatic deposit packet counters, function block.
lesson5_1
- 使用定时器1作为为中断，用数码管显示中断程序中设置的各数字，-Use Timer 1 as to interrupt, digital display of the numbers set in the interrupt program,
1
- 烟雾传感器C程序，楼宇智能报奖系统的主要程序，希望有用-Smoke sensor C program, Building Intelligent Business Award system program, the hope of useful
breathled
- //晶振11.0592 //灯光在单片机控制之下完成由亮到暗的逐渐变化-//Crystal 11.0592// lighting under the control of the microcontroller to complete the gradual change from light to dark
Timer0
- 设置计数器0为工作方式1(0000 0101)，实现定时，并且显示-Set Counter 0 1 operation mode (0000 0101), to achieve timing, and display