资源列表
XC800_FOC_KEIL
- 英飞凌8位单片机 XC800系列（XC888,XC886等）马达空间矢量控制FOC，KEIL编译调试。适用于无传感器BLDC或永磁同步电机。效率高，噪声低，变频成本相对较低-Infineon XC800 family of 8-bit MCU (XC888, XC886, etc.) the motor space vector control FOC, KEIL compiler debugging. Apply sensorless BLDC or PMSM. High efficiency
vb
- 并口测试程序，可以通过达林顿管驱动步进电机-Parallel port test program, you can drive stepper motor Darlington
SHT10
- SHT 温湿度控制， 51单片机+1602液晶显示。Keil uVision2编写，有proteus仿真。-SHT temperature and humidity controlled, single-chip 1602 liquid crystal display 51. Keil uVision2 writing, there proteus simulation.
modbus
- 基于RS232物理接口的modbus协议的实现。目前提供三个功能码，并附有proteus仿真文件和整个keil工程文件。 原来在CSDN上下载到的,但是CSDN上面那个无法直接拿来运行.少了一些变量定义之类的. 现在修改好了,可以直接拿来用.-Based on the realization of the RS232 physical interface modbus protocol. Three function code, with proteus simulation fi
SHARP_GP2Y10
- 粉尘传感器，SHARP公司生产的GP2Y10，AVR单片机实现，ATMEGA88，测试成功-Dust sensors, SHARP produced GP2Y10, AVR MCU, ATMEGA88, the test is successful
Infrared-reception-and-emission
- 用51单片机模拟红外发送和接收解码的过程，软件实现红外发送，接收端实现红外数据解码，并用数码管显示出来，主要是对红外PWM(脉冲宽度调制) 和PPM(脉冲位置调制) 两种形式编码的研究-Simulation of infrared transmission with 51 single-chip microcomputer and the decoding process, software realization of infrared transmission, infrared recei
遥控解码
- 利用51单片机实现简单的遥控解码程序，在LCD液晶屏上显示功能(The use of 51 single-chip simple remote control decoding process, in the LCD LCD screen display function)
Test(1)
- 在执行停止指令之前，必须通过软件正确设置B以获得稳定。(Before executed STOP instruction, B must be set properly by software to get stabilization.)
xx
- 本工程基于CYPRESS的固件程序框架，程序中通过使能端点中断，进行端点间数据的传送；利用端点中断进行环路测试-The project framework based on the firmware CYPRESS, proceedings interrupted by enabling the endpoint, to transmit data between endpoints use of endpoint interrupt loop test
wenduji
- 这是一个数字温度计的的控制程序，含有多点测温，很好的程序
PWM_breathing_led
- 利用MSP430输出PWM控制呼吸灯（IAR工程）-Using PWM by MSP430 to control breathing led
PDIUSBD12-C-library
- PDIUSBD12 单片机C语言固件库 学习USB编程的好资料。-The PDIUSBD12 microcontroller C firmware libraries to learn good information on the USB programming.