资源列表
UsbToUart
- usb 转串口的固件端代码，主控器采用AT89S52实现。-end firmware transfer usb serial code, master with AT89S52 achieve.
AD
- A/D转换器是用来通过一定的电路将模拟量转变为数字量。 模拟量可以是电压、电流等电信号，也可以是压力、温度、湿度、位移、声音等非电信号。但在A/D转换前，输入到A/D转换器的输入信号必须经各种传感器把各种物理量转换成电压信号。-A/D converter is used by certain circuit analog into digital quantity. The analog voltage, current can be other signals, also c
ad_da
- 基于MEGA16的ad/da转换程序，带proteus仿真文件，调试成功，并由液晶显示。-Based on MEGA16 of ad/da conversion process, with proteus simulation file, debugging success by the liquid crystal display.
4level-menu-12864
- 4级菜单12864 4 级菜单12864-4level menu 12864
pcf8814
- LM3S1138下的Nokia1110显示屏驱动-The Nokia1110 display driver of LM3S1138
esoap-examples-1.2
- ESOAP是一款专注于嵌入式web service开发的工具 压缩包里提供了基本的例子
11_a51
- WAVE6000编写的常用的程序 包括键盘 通信 数据转换 -WAVE6000 prepared by the common keyboard communication procedures include data conversion
terminal.tar
- *小型终端 LCD：6963 CPU：atmega16 ps2键盘 7.3728晶振 -* Small terminal LCD: 6963 CPU: atmega16 ps2 keyboard crystal 7.3728
e_code_design
- 51内核单片机电子锁的设计，含有毕业设计论文，希望对大家有帮助。-Of 51 kernel single-chip computer electronic lock design, containing the graduation design paper, hope to help everyone.
shizhong
- 万年历，时钟程序，可通过按键调节年月日时分秒。数码管显示-Calendar, clock procedures, minutes and seconds by pressing a button when adjusting the date. Digital display
C
- 功能：arm7平台的I2c驱动程序，硬件I2C软件包，利用中断方式操作。 * 说明：主程序要配置好I2C总线接口(GPIO、总线时钟)
(HumiTempLight)
- CC2530的温湿度采集源码，没有涉及到zigbee协议栈中，测试过是可以实现的-CC2530 temperature and humidity acquisition source, not related to zigbee protocol stack