资源列表
chapter5Timer
- SPCE061a_計時器_教你如何使用c撰写开发程式，同时检测开发板之功能-_ Timer SPCE061a_ teach you how to use c to write the development of programs, at the same time development board Detect function
NAND_numonyx
- NAND discr iptions list of NUMONYX
AVR-devicer-for-2.2-colour-LCD
- avr单片机驱动的2.2串口彩屏。环境为IAR-2.2 avr microcontroller-driven serial color
withoutPID
- 串联型数控电源设计源代码，keil C4.0采用闭环算法实现。-CNC Power tandem design source code, keil C4.0 uses a closed-loop algorithm.
Threephasemotorpwm
- 三相电机驱动，通过电压调速，并按键选择调节电机速度。并存储三个工作状态，正反转可调。-Three-phase motor, the voltage control, and buttons to choose to adjust the motor speed. And stores the three working state, reversing adjustable
code2
- 通过MFRC522对IC卡进行读写，1602显示卡号以及卡号类型，并通过串口想上位机发送卡号和卡号类型信息。-By MFRC522 the IC card reader, card number and card type 1602 display and the PC via the serial port would like to send the card number and card type information.
NRF2401
- 基于无线通信技术实现的超声波测量仪表,基于51芯片，所用模块为NRF2401-Ultrasonic measuring instrument based on wireless communication technology, based on 51 chip and the module used for NRF2401
MMC_SD
- The schematic is at foler schematic. The hex file is at foler default. You can compiler the code yourself using AvrStudio4.13 b528 + WinAVR200701-The schematic is at foler schematic. The hex file is at foler default. You can compiler
NewTouchSwitch
- 新触摸开关软件 MSP430F2131+-touchswitch MSP430F2131+CC1100
Serial-A-D-converter-TLC549
- 主要目的是利用单片机以及TLC549芯片进行A/D转换，将模拟电压转换成数字可直观显示的电压的过程。把待测模拟电压信号信号输送到模数转换芯片TLC549进行转换，转换后的数据通过单片机进行处理，最后用LED进行显示。（附有PROTUES仿真图） -The main purpose is the use of single-chip and TLC549 chip A/D conversion, the analog voltage can be converted into digital
AVR_for_video_generator_src
- 这是一个令人叫绝的视频、音频生成器。AVR的运算速度足够处理黑白图像及声音的生成。(但不足以生成彩色图像)。
1250
- msp430与ADS1250接口程序，包括msp430的SPI口配置和中断处理程序。-MSP430 with ADS1250 interface program, including the MSP430