资源列表
ADC0804
- 内含有proteus仿真 ADC0804采用三总线方式连接单片机,实现每隔1s进行一次A/D转化,并在数码管上显示出来-Contains proteus simulation ADC0804 using three bus to connect the microcontroller every 1s carried out an A/D conversion and digital tube display
nrf24le1_uart
- 迅通公司开发板源代码，带UART通信驱动，带按键与LED驱动，固定频率射频收发-The EPSCO development board source code with the UART communication drivers, with buttons and LED driver, fixed-frequency RF transceiver
project24
- 单片机的定时器产生秒信号，控制十字路口的红、绿、黄灯交替点亮和熄灭，并且用4只LED数码管显示十字路口两个方向的剩余时间。要求能用按键设置两个方向的通行时间（绿、红灯点亮时间）和暂缓通行时间（黄灯点亮的时间）（哈工大单片机大作业内附proteus原理图）-The microcontroller timer generates a second signal to control the crossroads of red, green, the yellow alternately turned
EEPROM
- 单片机下的EEPROM的读写。
AM-51H-PCB
- AM-51H 51单片机学习板的pcb图供大家看看吧，我买来的学习板的pcb图-AM-51H 51 MCU learning board pcb diagram AM-51H 51 MCU learning board pcb diagram
90390_sound_music-v11
- 富士通单片机mb90390系列发出音乐例程-fujitsu mb90390 MCU Project. This project shows the usage of the sound-generator to play some music.
262267
- 无线收发芯片262，267的收发程序，已调好，没问题-Wireless transceiver chip transceiver 262,267 procedures have been fine, no problem
mcu-temp-circuit
- 单片机在电子产品中的应用已经越来越广泛，在很多的电子产品中也用到了温度检测和温度控制，但那些温度检测与控制电路通常较复杂，成本也高，本文提供了一种低成本的利用单片机多余I／O口实现的温度检测电路，该电路非常简单，且易于实现，并且适用于几乎所有类型的单片机。-MCU in the application of electronic products has been more and more widely, in many electronic products are also used in
T6963
- LCD T6963驱动程序 LCD T6963驱动程序-LCD Driver T6963 T6963 LCD Driver T6963 LCD Driver
ADC
- // This program measures the voltage on an external ADC input and prints the // result to a terminal window via the UART. // // The system is clocked using the internal 24.5MHz oscillator. // Results are printed to the UART from a loop with
gphoto2
- 单片机实现图片数据处理，应用起来十分重要-SCM image data processing, it is very important application
PIC16F877A-LED-digital-segment
- PIC16F877ALED的驱动程序，采用模块化编程。-PIC16F877ALED driver, modular programming.