资源列表
qiushan166(1)
- 595级联显示8位数码管带开关工作原理，脉冲信号控制步进电机-595 Cascade 8 digital tube with a switch works, pulse signal controlled stepper motor
DS1302
- DS1302时钟芯片的读取和写入，内含有两个程序，读取；读取+写入-DS1302 clock chip to read and write, which contains two programs, read read and write
62256_test_led
- 62256读写测试，通过则用LED指示。-62256 W/R test, through the use of LED indication.
Intelligent-password-lock
- 这是一款完整的电子密码锁程序，如果你有兴趣进一步开发，该程序将对你很有参考价值-This is a complete electronic password lock procedures, if you are interested in further development, the program will be of great reference value。
DS1302TEST
- 使用ATmega16驱动DS1302传感器，将测量的结果显示在数码管上-ATmega16 drive using DS1302 sensor, the measurement results are displayed on the digital tube
lamushixianshi
- 拉幕式数码显示技术，用AT89S51单片机的P0.0/AD0－P0.7/AD7端口接数码管的a－h端，8位数码管的S1－S8 通过74LS138 译码器的Y0－Y7 来控制选通每个数码管的位选端-Pull-screen digital display technology, with the AT89S51 microcontroller P0.0/AD0-P0.7/AD7 port connected to a-h digital side, 8-bit digital control of
modbus-s52
- 绝对好用，亲自验证 MODBUS 总线 源程序 -modbus
spi
- 全国电子设计大赛 声控小车源代码 独家提供 谢绝上传到其他网站-National Electronic Design Contest to provide an exclusive voice-activated car declined to upload the source code to other sites
aa
- 适用于51的双机通信程序。。用串口通信，并附有proteus仿真。keil开发环境-The double machine is suitable for 51 communication program. Using a serial port communication, and with proteus simulation. Keil development environment
STC_Demo_main
- STC单片机双串口通信源代码波特率可以设置，通讯地址可以设置。-STC SCM dual serial communication source code the baud rate can be set, address can be set.
430单片机demo代码
- 439系列单片机的各个模块编程demo代码！
12864
- 12864屏幕原始驱动程序，适合做屏幕测试。本人亲测，没有问题-12864 original screen driver, suitable for screen tests. . .