资源列表
test_5110_51
- 51 单片机的5110液晶的现实程序，有各个模块，可以直接在工程里用的。-51 of the 5110 LCD s reality program, with each module can be used directly in the project.
zhenliefangbo
- 基于STC12C5A60S2的阵列方波函数的源码，KEIL环境，如有转载，务必注明“小胖电子”-Based on the STC12C5A60S2 array square wave function source, KEIL environment, such as a transfer, be sure to indicate the "xiao pang electronic
C51-LCD1602
- C51 应用LCD1602液晶屏，带仿真原理电路图和程序-C51 Application LCD1602 LCD screen with simulation schematic diagrams and procedures
f347 uart
- f347 uart tx/rx
04.LED
- LED流水灯演示实验(STM32神舟III号-寄存器版)-LED water lamp demonstration experiments (STM32 Shenzhou III No.- register edition)
CH452--drivers
- 包含了CH452的驱动例程，已经调试通过。里面有两个例程，一个是51的(keil)，一个是430G2452的(CCS)-Contains the CH452 driver routines have been through debugging. There are two routines, one is 51 (the keil), one the 430G2452 of (CCS)
modbus-PCPdouble--SLAVE
- STC1C5204AD单片机modbus多机通信程序，一台PC带两台从机，其中一台晶振为11.0592M，另一台为12M，采用通信波特率为19200bps，实现了标准modbus的3和6命令，采用485通信协议，4854使能端为P3.7-STC1C5204AD microcontroller modbus multi-machine communication program, a PC with two slaves, one of the crystal is 11.0592M, anoth
LCD
- ARM LM811 1602液晶显示程序-ARM LM811 1602 LCD program
数控电流源源代码
- 基于tlc5615的数控电流源源代码，程序里都有定义，周一左右再添加一下说明，源代码仅供参考
alarm-program-based-on-MPS430
- 报警器源程序。采用MPS430单片机开发的。用C语言编写。现在贡献出来供参考-Alarm source. Developed by MPS430 microcontroller. With the C language. Now for information contributed by
07Internal-temperature-test
- ADUC841入门级程序，内部温度测试程序，简单易学。-ADUC841 entry-level program, the internal temperature of the test program, easy to learn.
RF_YS
- keil c51编写的125k RFID门禁控制系统软件，终端部分。-125khz RFID door control system software,that is terminal part.Language use keil c51.