资源列表
Demonstration-of-serial-communication
- ADC communication source code
ic21
- 93C46 三线读写程序 请大家试用,谢谢大家-93C46 three lines Please read and write procedures for the trial, thank you
test
- 一个基于STC89C52的单片机程序，可以通过按键来不停发送100ms（时间可调）的脉冲，通过定时器控制
MSP430-1602
- MSP430驱动1602程序（c语言）.-MSP430
12864
- C语言实现12864驱动程序,附详细注释说明-C language 12864 driver, with a detailed explanatory notes
clock
- 时钟的使用和程序控制，介绍其简单的初始化和简单的操作-The use of the clock and program control, introduces the initialization of simple and easy to operate
ex4_1
- 对独立键盘S2 键的按键次数进行统计，并在与P1 口相连的八个发光二极管上以二进制形式显示出来。（判断是否按下键盘，当单片机上电时所有IO 口为高电平，S2 键一端接地另一端接P3.4，所以当键被按下时P3.4 口直接接地，此时检测P3.4 肯定为低电平。）-S2 of independent keyboard keystrokes key statistics, and in the eight light-emitting diodes are connected with the P1 p
1602display
- 1602函数对任何从其他表或者数据出口传出的数据进行显示(The 1602 function displays any data that is exported from other tables or data outlets)
Pulse-count
- 脉冲计数并通过LCD显示出来的程序，可以用来监测脉冲的个数，比如在进行编码器脉冲的技术等等场合都很实用。-Pulse-counting procedures, and out through the LCD display can be used to monitor the number of pulses, such as during the encoder pulse technology, and so on are very practical.
danpianji-fuxiti
- 从内部RAM30H单元开始，有10个单字节数据。试编一个程序，把其中的正数、负数分别送40H和50H开始的内部RAM单元。-Start from internal RAM30H units, 10 single-byte data. A trial program, one of the positive and negative, respectively send 40H and 50H, internal RAM unit....
buj
- 步进电机 编程 测试 及数码管转动计数-stepping motor programme testing nixie tube count
STC89C52_Usart
- AT89S52单片机的串口发送与接收程序并附有详细的注释-The AT89S52 microcontroller serial port to send and receive program together with detailed notes