资源列表
1602displaychinese
- 液晶1602显示中文，显示“中华人民共和国” -1602 LCD display Chinese, display the
key4
- 430 独立按键程序 能真确运行 在板子上测试成功-430 individual keys program can actually test a successful run on the board
12PWM
- 12系列单片机的PWM控制，可以调节pwm占空比，输出电压在0到5V-The 12 Series MCU PWM control, can adjust the duty cycle of PWM, the output voltage from 0 to 5V
liushiudeng
- 主控芯片为89c52，有8个小灯，通电后8个小灯循环左移亮。-Master chip 89c52, there are eight small lights, power and eight small light cycle left off.
24c02
- 单片机C语言，用于读和存数据于EEPROM2402，已测试-Single-chip C language, for reading and keep data in EEPROM2402, have been tested
lcd1602-final
- 12864的操作子函数，不用考虑底层，直接导入显示图像，就可以显示。-12864 Function of operation, without considering the ground floor, directly into the image, you can display.
digclock
- 基于keil的51单片机数字钟，并在proteus上做仿真，语言为c语言-The keil of 51 single-chip digital clock, and to do simulation in proteus, language c language
SineWaveAndTriangularWaveGenerator
- 正弦波与三角波选择发生器程序，适用于KELL C51的环境 针对51系列单片机-Sine wave and triangular wave generator to choose the procedures applicable to the environment KELL C51 for 51 series single-chip
chaoshengceju
- 单片机超声测距程序包，用单片机开发工具keil 3写的。-SCM ultrasonic ranging package MCU development tools keil 3 written.
timer0
- C51单片机的定时器中断例程，普中开发板上面的官方例程-C51 MCU timer interrupt routine, general development board above the official routines
08-K1~K5-Control-2Bits-SEGDSY
- K1~K5按键控制两位7段数码管，可以通过按键开关实现加减与清0操作-K1 ~ K5 buttons control two 7-segment digital tube can be to achieve subtraction cleared through the key switch operation
obstacle-avoidance
- 单片机控制带舵机的小车，超声波避障，通过控制舵机来控制小车运动轨迹-SCM control with steering gear of the car, ultrasonic obstacle avoidance, by controlling the servo to control the trajectory of the car