资源列表
STM32独立看门狗程序
- 本源码为基于STM32的独立看门狗工作原理实验，配置寄存器IWDG_KR ，设定预分频和计数器初值(This source code is based on STM32 independent watchdog working principle experiment, configuration register IWDG_KR, setting preset frequency and counter initial value.)
STM32GPIO配置
- 本源码为基于STM32配置GPIO的源代码，主要是基于GPIO的基本结构和工作原理、工作模式，实现对其寄存器的配置(This source code is based on STM32 configuration GPIO source code, mainly based on GPIO basic structure and working principle, working mode, implementation of its register configuration.)
简易步进电机S加减速
- 驱动步进电机你值得拥有的，加油，来学习吧(Drive step motor drive)
STM32定时器中断程序
- 本源代码为讲解基于STM32的定时器中断程序，通过定时器TIM3产生间隔1秒钟一次的中断，在中断中控制LED发光二极管，每次中断都使发光二极管状态取反(This source code is explained based on the STM32 timer interrupt program, through the timer TIM3 interrupt an interval of 1 second, in the interrupt control LED light-emittin
stc89c52红外遥控LED变动
- 在lcd1602能显示按键编码，通过按快进和后退能够使led流水式变化
DWG_Smart-Card_USB-ICC_ICCD_rev10
- smart card specification
STM32F103C8T6-IMU-6050
- stm32f103硬件IIC读取MOU6050驱动代码，带DMP程序(STM32F103 hardware IIC reads the MOU6050 driver code, with the DMP program)
stm32746g_sdram
- stm32f746的SDRAM驱动，hal库文件编写(Stm32f746's SDRAM driver, Hal library file writing)
3.SDRAM读写
- STM32F4处理器 SDRAM完整读写历程，(STM32 SDRAM read and write)
2、流水灯
- 使用51单片机，流水灯的简单实现，使用C语言编程，软件是用usion keil 4,下载使用烧录软件一键导入(Using 51 singlechip, the simple realization of the flow lamp, the use of C language programming, the software is usion keil 4, download and use the burning software one key import)
继电器控制实现（通过GSM短信控制）
- 继电器控制实现（通过GSM短信控制）通过STM32平台SIM800C链接。(Relay control implementation (through GSM SMS control))
New Ysorkzz
- q saco filho da puta do racaralho porra librera essa perda chist