资源列表
07-USB通讯
- 主程序检测有按键按下则通过USB端口发送"This is BW-DK5483" , 可将开发板USB接口与PC连接，PC上运行串口大师等串口调试软件， 打开USB串口接收并观察开发板发送数据，也可由PC端发送数据至开发板,开发板将接收数据发回PC(The main program detects a button press through the USB port to send "This is BW-DK5483", the USB develop
09-红外收发器
- PC上运行串口大师等串口调试软件，通过USB接口向开发板发送数据, 开发板收到数据帧后，将其由红外端口发送；如开发板接收到红外信号，当红外端口接收到完整数据帧后，开发板将数据由USB口送至PC。本程序未采用NEC或Philips的红外协议，旨在展示一种像使用串口一样 使用红外接口的方式，实验表明，这一方法十分有效，在1200bps、3米 距离的条件下仍有非常好的收发效果。(PC run serial master serial debugging software to se
03-电子温度计
- BW-DK5438开发板电子温度计程序 在数码管上显示检测到的温度值(BW-DK5438 development board program / electronic thermometer display temperature value detected in the digital tube)
02-电子时钟
- BW-DK5438开发板电子时钟程序 ,在数码管上显示RTC时钟，亮度依次递增(BW-DK5438 development board electronic clock program, display RTC clock on the digital tube, increasing brightness in turn)
01-MINI电子琴
- 通过矩阵按键实现1,2,3,4,5,6,7,当有按键按下时,led会亮起,说明按键有效,同时发出声音(The 1,2,3,4,5,6,7 is implemented by a matrix button, and when the button is pressed, the LED will light up, indicating that the key is valid and the sound is made.)
main
- 基本IO功能,按键点亮LED,按键按下,LED亮起(Basic IO function, button to light LED, button press, LED light up)
STM32程序
- 分别控制四路电机转动，转速以正弦规律变化。与计算机进行串口通信，可用串口控制转速，位置控制。(The rotational speed of the four motor is controlled by the sine law. Serial communication with the computer, using serial port to control the speed, position control.)
超声波模块HC-SR04
- 用C语言编写的超声波脉冲发射程序和接受程序，以c51单片机为控制器(The ultrasonic pulse transmitting program and receiving program written in C language are used as the controller of C51 single chip microcompute)
基于stm32的mlx90615 红外测温oled显示
- 用stm32实现mlx90615的红外测温显示，通过oled显示出来。(Using stm32 to realize infrared temperature measurement of mlx90615, display through oled.)
STM32-ceju
- 根据超声波模块SR104来测量距离，适用于短距离。(According to the ultrasonic module SR104 to measure the distance, it is suitable for short distance.)
4. 使用库函数点亮一个LED
- 通过调用库函数在STM32103开发版上点亮一个LED灯(Light a LED lamp on the STM32103 development version by calling the library function)
闪烁灯
- 基于ATM89S52单片机的闪烁灯源代码，适合新手学习单片机。(Based on ATM89S52 single chip microcomputer flashing light source code, suitable for novice learning single chip)