资源列表
12864picturesandwords
- 12864显示图片英文数字，循环显示，可以改动。-12864 display pictures English numbers, and the cycle can be changed.
WinHex15.1SR-8
- WinHex15.1SR-8 很好用的16禁制数据编辑工具，具有对齐功能-WinHex15.1SR-8 good 16 ban data editing tools, has aligned
AD-convert
- keil工具编写的AD之间的转换，根据不同的板子可能需要改动-keil tools written in AD conversion may need to be changed, depending on the board
msp430g2xx3_ta_02
- MSP430定时器实验，当定时时间到达时，指示灯改变状态，实现闪烁效果。-Descr iption: Toggle P1.0 using software and TA_0 ISR. Timer_A is configured for up mode, thus the timer overflows when TAR counts to CCR0.In this example CCR0 is loaded with 50000. ACLK = n/a, MCLK = SMCLK = TACL
msp430g2xx3_uscia0_uart_01_9600
- MSP430单片机的UART实验，此处波特率设为9600.-The MSP430 microcontroller UART experimental, here baud rate is set to 9600.
STM8
- 风驰电子STM8教程，内部资料，玩转STM8-Fench electronic the STM8 tutorial, internal data, Fun STM8
C
- 用c语言写的CH450DS芯片的程序，里面的协议是模拟I2C-Using c language to write the CH450DS chip program, the inside of the protocol is simulated I2C
charger
- 大功率充电器4kw用宏晶单片机带温度补偿，冲电曲线流程清晰-Power charger with temperature compensation 4kw macrocrystalline microcontroller clear red power curve processes
rtt_iar
- rt-thread 在TI LM3S8962上的移植，IAR6.00以上版本均可，里面包含了LWIP协议栈-rt-thread transplant TI LM3S8962 versions can IAR6.00 above, which contains of the LWIP protocol stack
msp430g2xx3_wdt_02
- msp430看门狗中断实验，当设定时间到达时，指示灯会改变亮灭状态。-Descr iption: Toggle P1.0 using software timed by WDT ISR. Toggle rate is exactly 250ms based on 32kHz ACLK WDT clock source. In this example the WDT is configured to divide 32768 watch-crystal(2^15) by 2^13 with a
msp430g2xx3_uscib0_i2c_01
- MSP430通过I2C总线模式跟温度传感器TMP100进行数据通信。当温度达到一定值时，指示灯亮。-MSP430 data communication through the I2C bus mode with temperature sensor TMP100. When the temperature reaches a certain value, the indicator light.
wenduDS1302
- ICCAVR编写的mega16测温程序,使用DS1302，1602液晶显示-The mega16 written by ICCAVR thermometer program DS1302