资源列表
08-K1~K5-Control-2Bits-SEGDSY
- K1~K5按键控制两位7段数码管，可以通过按键开关实现加减与清0操作-K1 ~ K5 buttons control two 7-segment digital tube can be to achieve subtraction cleared through the key switch operation
xiaoche
- sim300,打电话发短信的单片机程序 。-sim300 for danpianji
B96DATA
- 一款仪器的图形界面，可在51系统下自动运行。-The graphical interface of an instrument 51 system runs automatically.
UART0_OK
- 基于C8051F340的串口通信测试程序，硬件上电平转换用MAX-C8051F340 serial communications test program based on the hardware level conversion with MAX3232
ceju
- 自己编写的一个超声波测距程序，基于C8051F单片机-I have written an ultrasonic ranging program, based on C8051F
paobumiaobiao
- 对51单片机的一种应用！主要是对单片机的中断的练习！-On a 51 MCU application! Microcontroller interrupt practice!
UCOS
- 采用stm32内部flash制作的flash u盘，在电脑上可以正常使用，只是空间有点小带UCOS系统，不过没有LCD显示，一大遗憾-Flash u disk using the stm32 internal flash production on the computer can be used normally, but little room with UCOS system, but there is no LCD display, a great pity ..............
MSP430-IR-transmit-receive
- 利用CC430X513X的定时器来收发红外信号。提供源程序的学习和发送程序。-The use of timer CC430X513X to send and receive infrared signals. Source of learning and sending program.
wenduceshiyuanmachengxu
- 基于vb编写的串口通讯vb温度控制程序，和单片机串口通讯时用。-Prepared by the serial communication based vb vb temperature control program, and the microcontroller serial communications.
99min
- 基于51单片机，99分钟定时器c语音源码程序。可以通过按键上调下调时间，定时器到时喇叭发声报警 带有点按和连按功能-Based on 51 single-chip, 99 minute timer c voice source program. Time can be raised through the key down timer when the horn sound the alarm with a tap and double-click function
1ms
- 1ms方波源码程序，51单片机源码程序，定时器输出。-1ms square wave source program, 51 microcontroller source code program
bizhangxiaoche
- 一个使用超声原理制作单片机的避障小车系统基于atmage16,有小车实物图，电路原理图，源代码。制作简单，易上手。-Car system based on the use of ultrasound principle of making MCU obstacle avoidance atmage16, there are trolley physical map, circuit schematics, source code. Create a simple, easy to use.