资源列表
1602
- 51单片机控制1602屏 用来学会1602屏的基本控制-The SCM 51 1602 screen
systick
- 17-延迟1000个ms，移植sys成功，记住思路可以参考网上配置，但移植时只能参考3.4版的官方例程较好STM32 指导教程.在ALIENTEK板子上调的-17- 1000 ms delay transplantation sys successful, remember thinking can refer to the online configuration, but only refer to the 3.4 version of the official routine better
IO-KEY-SERIAL
- STM32在alientek板子上实现IO口，串口，按键操作，仅供参考-The STM32 alientek board the IO ports, serial, key operation for reference only
Getting_started_ASC_SSC
- XC164的ASC的使用，采用的方法比较简单-The XC164 ASC use, the method used is relatively simple
DG128SystemDEMON
- MC9S12DG128单片机的简单开发例程-MC9S12DG128 simple microcontroller development routine
MCPcanbus
- mcpcan 发送的发送接收程序,满足canbus2.0A、B规范及线路-mcpcan recive and send code
PID
- PID自整定的研究,讲解了模糊控制和PID控制结合的控制算法。-PID self-tuning control algorithm to explain the combination of fuzzy control and PID control.
usart--ADCY
- 通过设置stm32微处理器的ADC，USART ,NVIC实现对stm32 PA0端口电压的采样，并把采样数据通过串口在上位机显示。-Set stm32 microprocessor ADC, the USART, NVIC stm32 PA0 port voltage sampling, and sampling data through the serial port on the host computer.
usart
- 通过设置stm32的usart nvic 实现串口的中断接收发送-By the set of stm32 usart nvic achieve serial interrupt reception
dian-ya-biao-yiqiande
- 通过采样PA0(ADC_0)引脚上的交流电压信号，再进行真有效值运算实现简易交流电压表-True RMS computing simple AC voltmeter AC voltage signal the sampling PA0 (ADC_0) pin, then
ff9
- fats 文件，最新版。里面包含多种单片机移植文件-fats files, the latest version. Which contains a variety of single-chip portable document
Source
- stm32 RTC程序,利用串口显示一个实时时钟包含main.c和stm32f10x_it.c，其他为STM32启动文件和库文件，KEILv4.10编译通过-stm32 RTC program, the use of the serial port to display a real-time clock contains main.c and stm32f10x_it.c other STM32 start and library files, KEILv4.10 compiled by