资源列表
xianshi1
- proteus仿真MSP430单片机,ampire 128x64 显示-proteus msp430
pjs
- 多位平均数,去除最大数和最小数的误差，取中位平均值，去除抖动-More than the average
5bit
- 5位数码管显示时间,用台湾义隆单片机EMC78P447-Five digital display, Taiwan' s Elan microcontroller EMC78P447
C
- 单片机控制动态数码管，通过动态扫描实现-SCM dynamic digital tube
SI4432--80C51
- 基于80c51单片机的SI4432 433M的无线发射芯片的c程序hex程序 最大传输距离1500米·-Based on the 80C51 microcontroller the SI4432 433M wireless transmitter chip c program hex program the maximum transmission distance of 1500 m
NRF905-wireless-temperature-
- 基于80c51的NRF905无线温度采集程序（数码管 Ds18b20 ）-NRF905 wireless temperature collection procedure (bidirectional). Zip
t0_push_1khz
- 单片机实例程序：用定时器0中断方式产生1KHz频率占空比为 70的方波-SCM example program: use timer interrupt 0 1 KHz frequency can make of empty for 70 square wave than
LCDxianshi
- 本设计主要是接收由键盘Data线发送过来的11位串行数据。用的是11位移位寄存器的基本原理。实现将由键盘发送过来的键盘扫描码转换成ASCII码，并在LCD1602液晶上显示出来。 -This design is to receive 11 serial data sent from the Keyboard Data line. Is the basic principle of the 11-bit shift register. Will be over the keyboard to se
80C51-NRF24L01
- 基于80c51的NRF24L01发送和接收程序（1602 ds18b20 循迹小车）-80C51 NRF24L01 send and receive procedures (1602 Ds18b20 tracking dolly)
STM32_USB
- 基于STM32的USB实验，移植时需要修改相应部分-Need to modify the corresponding part of the STM32 USB-based experiments, the time of transplantation
STM32_I2C
- 基于STM32的I2C实验，调试成功，可移植使用-Based on the STM32 I2C experiment, the successful commissioning, portable use
STM32_CAN
- 基于STM32的CAN程序，可移植到相关项目使用-CAN program based on the STM32, portable