资源列表
DAC_2016_12_8
- 采用msp430单片机 ，C院编写，实现 DAC功能(use msp430 to achieve the function of DAC)
main
- 一千克电子秤程序，精度0.5克。(称重能够任意改的基本程序，按键，1602显示)(One kilogram electronic scale program, accuracy 0.5 grams. (the basic program that weights can be changed arbitrarily, button, 1602))
wendu
- 温度传感器，可以读取温度传感器数据，在液晶上面显示，直观方便。(Temperature sensor, you can read the temperature sensor data, displayed on the LCD, intuitive and convenient.)
NRF24L01
- 无线模块，可以远程发送和接收数据，数据稳定可靠。(The wireless module can send and receive data remotely, and the data is stable and reliable.)
TEST
- 4通道4-20mA模拟量采集板通过RS485总线发送采集数据给PC机(The 4 channel 4-20mA analog acquisition board transmits data to the PC through the RS485 bus)
s12xep100 PWM
- xep100的PWM模块的实例，比较通用，可直接配置频率/占空比。(s12xep100 pwm,the frequency/proportion can be directly configured.)
实验13 TFTLCD显示实验
- LCD屏幕显示程序,测试LCD屏幕正常显示的程序(LCD screen display program, test the normal display of LCD screen program)
延时程序
- 延时程序，自己整理的一个延时程序集合，可以方便调用直接使用不需要计算(Delay procedures, finishing a collection of their own delay procedures, you can easily call the direct use, do not need to calculate)
用单片机PWM实现DA
- 如果在单片机控制的仪表里用PWM方式完成D/A输出，将会使成本降低到12位D/A芯片的十分之一左右。我们在S系列流量仪表中采用了这种方式，使用效果非常理想。下面介绍一下PWM方式D/A的构成原理。(If in the microcontroller control instrument, using PWM way to complete the D/A output, will reduce the cost to 12 bit D/A chip about 1/10. We have ado
Project_RTI
- s12xep100 RTI模块简单的设置及波形生成。(s12xep100 RTI for pwm)
STM8实现按键LED程序
- 实现stm8的IO口之间的互动，电路板上高低电平的转换，体现为按键和LED灯。 按下按键，灯亮。并且有流水灯功能。(Realize the interaction between the IO ports of stm8, the conversion of the high and low level on the circuit board, reflected as the key and the LED light. Press the button, the light is on
STM32F4
- STM32F4工程模板,标准库1.8.0(STM32F4 porject templates)