资源列表
iarembeddedworkbenchfortimsp430v3.40akeygenlz0.zi
- msp430 development environment crack
CodeForMicrochipGUI
- Microchip图形用户接口在STM32F103上的实现，带TFT液晶控制器ILI9325的驱动程序，对学习RL-RTX和GUI有很好帮助。-Microchip graphical user interface implementation on the STM32F103 with TFT LCD driver controller ILI9325. Learning RL-RTX and GUI have a good help.
jtd
- 用plc2000带操作系统做的交通灯 里面有很多文件 希望大家有用 -Plc2000 do with the operating system with the traffic lights there are a lot of hope that a useful document
cortex_m3s811_1602
- 1602的液晶程序，写好了模块，很方便的可以拿过来就用，只要改几个引脚就行了。-1602 LCD process, written a module, you can easily take over for use, as long as the change a few pins on the line.
keil_project_module
- keil for arm的cortex m3s811的驱动库和模板文件，方便大家快速的进行开发，写程序不用进行其它的不必要的配置-keil for arm of the cortex m3s811 the driver library and template files, we facilitate the rapid development of written procedures without unnecessary configuration for other
pwm_lm3s811
- 只是一个lm3s811的pwm程序，程序的注释写的很详细，提供给大家学习cortex的pwm控制，不懂的可以加我QQ:397916230-Just a lm3s811 the pwm program, the program is very detailed written comments provided to them to learn cortex of the pwm control, I do not understand can be added QQ: 397916230
I2C
- C8051F020 通过SMBus 与AT24CXX 接口的示例代码-C8051F020 through the SMBus interface with the sample code AT24CXX
DS18B20
- 实现对DS18B20的读取，并在数码管上显示-Achieve DS18B20 read and displayed on the digital
DAC0
- 本例直接采用应用笔记案例.实现DAC模拟信号输出，由T4定时控制DAC0输出DTMF信号-Application note in this case by case directly. Realizing DAC analog signal output from the T4 output DTMF signal timing control DAC0
CP1
- 此程序可完成CP1比较器的比较功能，比较器基准信号来自于VREF引脚, 比较器响应后将产生中断,可在中断程序中设断点观察.-This program can complete the comparison function of the comparator CP1, the comparator reference signal from the VREF pin, the comparator generates an interrupt response will be set b
ADC
- 采集外部模拟电压,采用ADC0通道0,内部VREF,并显示于LED上.-External analog voltage acquisition using ADC0 channel 0, the internal VREF, and displayed on the LED.
24C01
- 实现存储器EEPROM AT24C02的数据读写操作,同时了解软件实现I2C总线读写-The data memory EEPROM AT24C02 achieve read and write, and understand the software to read and write I2C bus