资源列表
4x4CH452
- CH452的2线接法程序，单片机的外围程序，单片机为C8051F020-CH452 2-wire Connection program, microcontroller peripheral procedures for the C8051F020 MCU
SaoMiaoMa
- 这是我用win-tc编写的测试键盘扫描码程序的源代码，turbo c3.0上能编译。-This is a win-tc I use the keyboard scan code test preparation program' s source code, turbo c3.0 on to compile.
can
- CAN总线学习心得．常用标准波特率设置，为什么基本上都 是单次采样？即使是低速的时候也是这样的-failed to translate
hongwai
- 用５１单片机设计的红外发送处理程序，基于ＫＥＩＬ编译，而且调试成功！大家下啦！并给于指导-Single chip design with 51 IR send processing program, based on KEIL compiler and debugging success! All under it! And to the guidance
wg
- 基于51单片机的简易波形发生器：内有三角波、方波、锯齿波、正弦波-simple wave generateor
BMP_PHOTO
- STM32红牛开发板下移植的znFAT例程 调试通过 可创建、打开、枚举文件。液晶显示用的是FSMC控制的ILI9320液晶。-failed to translate
proteuscourse
- 有用的ptoteus教程，没有单片机的话，可以从这里开始-Ptoteus useful tutorial, there is no single chip, you can start from here
playtune
- 这是今天我写的一个播放音符的小工程，愿与大家一道进步，希望对大家能有用-This is a play today I write notes and minor projects, is willing to join in progress, and hope we can be useful
12864
- lcd12864驱动程序，可以配合华工单片机开发板做实验。-lcd12864 driver, microcontroller development board can meet the Chinese workers to experiment.
GPIOsimulateUART
- 使用HT46F49E的GPIO+定时器模拟UART功能，默认波特率为9600，可调整，可移植-its a simulation of UART based on GPIO and Timer,it has passed on signal-chip of HT46F49E
DS1302DRIVERBASEONHT46F49E
- DS1302基于HT46F49E的驱动程序，内有注释，调试正常通过，容易移植-A c code of DS1302 driver,it has passed on the signal-chip HT46F49E and easy to migrate
ST7902LCMdriver
- 以ST7902为驱动的12864LCM的C参考驱动程序，在HT46F49E单片机上调试通过，便于移植-it s a c code of st7902 based 12864LCM driver program,it has passed on signal-chip HT46F49E,and it is easy ti migrate