资源列表
DSP__RAM_UCOS_2.00
- 关于嵌入式实时操作系统UCOS的完整代码,有注释,已移植值TMS320F28335上-UCOS embedded real-time operating system on the complete code, with annotations, has been transplanted on the value of TMS320F28335
ucosii_microblaze_AN-1013
- 这是一个ucos官方的microblaze上移植ucosii的范例,比较有参考价值,放在上面供大家下载。-This is an official microblaze ucos ucosii on the transplant example, compared with a reference value, on top for all to download.
FM1208
- ISO14443A协议 非接触式IC卡 FM1208-ISO14443A FM1208
ili9806_GUI_DEMO
- 基于STM32F103ZET6+ucos-ii+ucgui屏使用FSMC接口,控制器为ILI9806 480*8-STM32F103ZET6+ucos-ii+ucgui FSMC ILI9806 480*800
LDC1314
- 基于STM32F103的LDC1000金属探测器-LDC1000 metal detection based on STM32
stm32智能安防系统
- 1、 功能描述: 超声波实现防盗测距,以四个led灯显示逐渐靠近的距离。当距离近到4灯全亮时蜂鸣器报警。 RFID实现刷卡开锁功能,刷卡同时系统会在Flash中读取验证卡号是否合法,并将刷卡卡号同当前时间及是否合法的标记存入Flash中。 OLCD上显示蓝牙连接状态,当前刷卡卡号,是否有火,是否有可燃气体,超声波测距距离,以四格显示。 HC-05实现与手机的蓝牙通信,通过上位机发送指定命令,查询当前时间、温度、湿度、火焰、刷卡记录及可燃气体状态,并可以通过命令修改系统时间,清空刷卡记录。
SD卡源程序
- 这是我编写的SD卡源程序,在ARM芯片上长期使用,非常稳定可靠,每一个子程序都有详尽说明,能非常方便地移植到UCOS,LINUX,VXWORKS上- This is the SD card source program which I compiles, uses for a long time on the ARM chip, extremely stable is reliable, each sub- procedure all has exhaustive showing, can
GausCoor坐标转换
- 坐标转换程序,可用于经纬度坐标转大地坐标或大地坐标转经纬度坐标!-coordinate conversion process can be used to turn longitude and latitude coordinates of the earth coordinates or geodetic coordinates of latitude and longitude coordinates turn!
LED条屏控制例程
- 本程序是用LM3S800+UCOSII2.52开发的条屏控制器,具有很好的参考价值,里面包含有HT1381、AT45B016的驱动。
uCos2 6410 u-boot 浮點儀表
- uCos2 6410 u-boot 浮點儀表。實現了ad轉換和波形圖的顯示。基于ucos和ucgui。
jzq.rar
- 低压集中抄表系统的集中器程序. 采用STR710FZ2芯片.ucos操作系统,,Low concentration of centralized meter reading system program. STR710FZ2 chip.
SUN
- 基于UC/OS-II的温度实时监测系统, 控制CPU自带温度传感器,并将温度显示在数码管或LCD上;当温度大于设定值时报警;报警驱动蜂鸣器并通过串口上传到PC;PC给出消除报警指令后则取消报警;报警的重新启动由按键通过中断送入;合理安排UC/OS-II实时任务,合理利用UC/OS-II各类事件机制(信号量、消息邮箱、消息队列、事件标志组等)。-Based on UC/OS-II real-time temperature monitoring system, the control CPU co