资源列表
i2c_7113
- 利用I2C配置SAF7113的代码，利用vhdl语言编写。-Config the SAF7113 via I2C,write in VHDL.
fpgawritetoram
- fpga向RAM中写数据，数据宽度32位，利用VHDL编写。-FPGA write data to ram in 32bit data bus,write in VHDL.
sequential-detector
- 用状态机实现序列检测器的设计，并对其进行仿真和硬件测试-With a state machine sequence detector design, and its simulation and hardware testing
VGA
- 利用FPGA控制VGA显示器，实现256色的屏幕显示，里面有详细的注释。-Using FPGA to control VGA monitor with 256 colors on-screen display, which has detailed notes.
vga
- 利用FPGA控制VGA显示器显示字符汉字的程序，里面有注释。-VGA display with FPGA control procedures Kanji characters, there are comments.
clock
- 一个能在电路板上实现时钟显示功能、计数功能、闹钟功能的VHDL源码-One can achieve on the circuit board clock display, counting function, alarm clock function VHDL source code
sdram_module3
- 能够实现16位的SDRAM的读写，没有仿真文件，只有SDRAM读写的源代码，用Verilog编写-can complete read or write sdram， only include Verilog code and no simulation files
Experiment04
- 浮点数的除法器的Verilog 源代码，使用Quartus II开发环境编写，塞琳思的ISE可能打不开-floating-divider s Verilog codes,can be opened by Quartus and not by ISE
17_usb_device
- Ch376控制器的控制程序，用于完成USB接口-Ch376_controller code by Verilog，used in USB communication
13_flash
- 用于读写8位数据口的FLASH芯片，使用Quartus II开发，Verilog文件-used to read or write the 8bit Flash Chip,developed by Quartus with Verilog language
23_lan
- Lan芯片ENC28J60的驱动程序，Quartus II开发，Verilog编写-the driver for a Lan Chip ENC28J60，developed by Quartus II using Verilog
1122334455
- 设计一个十进制计数器，具有显示位置随计数时钟在八个数码管中左右滚动的功能-Design of a decimal counter, a display position with the count clock in eight digital tube rolling around functions