资源列表
ds2762
- 本系统是基于8051的锂电池电量测量系统，测量芯片是DS2762，单片机的P1.4口连接DS2762的DQ管脚，测量到的数据显示到LCD屏幕上-The system is based on the 8051 lithium battery measurement system, measuring chip DS2762, DS2762 microcontroller P1.4 port to connect the DQ pin, the measured data displayed on
16x16roll
- 点阵屏，显示16*16，字体单色，滚动显示-Dot matrix screen display 16* 16, font color, scrolling display
Infrared-remote-control-experiment
- 功能：开机在LCD上显示一些信息之后，即进入等待红外触发，如过接收到正确的红外信号，则解码，并在LCD上显示键值和所代表的意义，以及按键次数等信息。-Function: after the boot display some information on LCD, which is awaiting the infrared trigger, such as the infrared signal is received, the correct decoding, and display th
The-touch-screen-test
- 功能：开机的时候先通过24C02的数据判断触摸屏是否已经校准过，如果没有校准，则执行校准程序，校准过后再进入手写程序。如果已经校准了，就直接进入手写程序，此时可以通过按动屏幕来实现手写输入。屏幕上会有一个清空的操作区域（RST），点击这个地方就会将输入全部清除，恢复白板状态。程序会设置一个强制校准，就是通过按KEY0来实现，只要按下KEY0就会进入强制校准程序-Function: the boot when the first through the 24C02 data to determin
text
- 八位七段共阳极数码管的显示，动态循环扫描。-Eight 7, a total of anode digital tube display, dynamic scanning cycles.
STC806
- DX5767 FM收音机调试代码，已测试过。-DX5767 FM developingcode。
serial-communicate
- 上位机串口程序，可与下位机进行串口通信。-PC serial port procedures, can be a serial port communication with the machine.
LTC68042
- 电池管理系统，最多可同时管理12节电池电芯。LTC6804-Battery management system can manage up to 12 battery cells. LTC6804
irboard
- Program IR communication for PIC 16F84
STM32TIME
- stm32时钟程序，这是一个非常好的学习与实践程序-stm32 clock program, which is a very good program to learn and practice
STM32Touch
- STM32触摸屏程序，非常实用的程序，值得学习。-STM32 touch screen program, a very useful program, it is worth learning.
STM32CAN-Signal-communication
- STM32 CAN Signal communication is very good program