资源列表
4
- 配置DTU参数，设置需要更改的参数，并发送更新指令 -DTU configuration parameters, set the parameters need to be changed, and sends the update command
5
- 下面是一段VC中判断DTU超时的Timer的代码-Here is a timeout in VC Timer to determine the code DTU
51sound
- 单片机发声，用于控制有源蜂鸣器。 单片机发声，用于控制有源蜂鸣器。-Single-chip voice, used to control the active buzzer.
7_sensor
- sensor code with 7 sensor at the bottom of the robot to sense the guestor
Zigbee
- 介绍zigbee协议和各协议层的功能。zigbee使用场合。-Introduction zigbee protocol stations and Features
wenduduqu
- 通过ATM89c51系列单片机实现.基于DS18B20温度测量模块的数字读写转换，并能够在数码管上显示DS18B20温度测量模块中的温度数值-By ATM89c51 series MCU based DS18B20 digital temperature measurement module to read and write conversion, and the ability to display DS18B20 digital temperature measurement module
chuankoutongxin
- 基于Atm89c51并用定时器T0方式以及串口通信送入4094，用数码管接于4094输出端，使单片机发送的数据能间接的在数码管上显示0-99；-T0 timer based Atm89c51 and use serial communication mode and into 4094, then in 4094 with digital output, the microcontroller sends the data to indirect control on the digital d
jianyidianzizhong
- 简易电子钟的设计：利用AT89C51单片机的P1口的P0.0-P0.7连接到一个共阳数码管，P2.0-P2.7控制位选端，设计出一个电子钟。P1.0、P1.1、P1.2用于调节电子钟的时间。-Simple electronic clock design: using AT89C51 microcontroller port P0.0-P0.7 P1 connected to a common anode LED, P2.0-P2.7 control bits select terminal, d
flash.c
- mini2440 norflash driver
flash
- mini2440 norflash driver norflash驱动-mini2440 norflash driver
ADT200
- 盛博科技ADT200数字/模拟采集卡例程for dos-SBS Science Technology ADT200 digital/analog capture card routines for dos
TFT2.4
- TFT液晶屏在51单片机上的实现！！！用的是P0,P2口。-51 single-chip TFT LCD screen on the implementation! ! !