资源列表
STM8A_CLK
- 在MCU启动后，负责时钟模块初始化， 并从默认的内部时钟切换到外部时钟。 提供关断MCU 外围模块时钟的接口函数-After the MCU startup, is responsible for the clock module initialization, and switch from the default internal clock to the external clock. Provides shutoff MCU peripheral interface function m
BCM1_Timer
- 定时器4提供10ms的定时功能，作为系统节拍。 定时器1的1~4通道，定时器3的2通道，提供5个通道的PWM输出。 定时器3的1通道用作内部输入捕捉，校准最小时钟源。 定时器2为LIN提供时钟源（本模块不作处理）。-4 provide 10 ms timer timing function, as a system. Timer timer 1 of 1 ~ 4 channel, 3 2 channel, provides five channels PWM output.
STM8A_AD
- 负责A/D寄存器初始化和数据采集功能。希望能够被大家用到-Responsible for the register initialization and A/D data acquisition function. Hope to be able to be used
myproject
- 不断建立文件，每次运行本程序都保存为不同的文件名-Continue to create documents, are saved as a different file name each time you run the program
stm32USB
- USB读卡器驱动源程序，利用stm32实现USB读取读卡器。-USB Driver
series232
- RS232串口程序，输入字节，输出所需显示的字符串-Serial RS232 procedures, input byte output the string displayed
ds1722
- ds1722 driver (UBOTT)
bcm570x
- bcm570x DRIVER (UBOOT)
cs8900
- cs8900 DRIVER (UBOOT)
i82365
- i82365 DRIVER (UBOOT)
ns8382x
- ns8382X DRIVER (UBOOT)
rtl8019
- rtl8019 DRIVER (UBOOT)