资源列表
I2C
- STM32F1xx for I2C programming on MDK 5
单片机顺序启动
- 51单片机顺序启动源码，从p0-p20顺序点亮
vst
- adc寄存器配置，功能代码编写，实现1GSPS采样率信号采集功能(ADC register configuration)
外部中断实验
- 基于STM32f4107ZGT6开发平台，软件用的是keil，利用外部中断实现led的闪烁(Using external interrupts to achieve LED flashing)
实验4 串口
- PC端串口调试助手向板子发送数据，板子接受到数据后，再把数据发送回给PC端串口调试助手(PC port serial debugging assistant to send data to the board, the board accepted the data, and then send the data back to the PC side, serial debugging assistant)
2.4G
- 木兰协议2.4g无线卡片，是现在多数采用的2.4G读卡器和卡片方案(Mulan protocol 2.4G wireless card, is now the most used 2.4G card reader and card program)
STM32F1开发指南-寄存器版本_V3.1
- 基于cortex-m内核的stm32的寄存器版本的开发指南(Development Guide for register version of STM32 based on Cortex-M kernel)
MPU6050六轴传感器实验
- 基于cortex-m内核的mpu6050六轴传感器实验(Experiment of mpu6050 six axis sensor based on Cortex-M kernel)
ArduinoSketchUploader-master
- arduino上传程序协议，支持大多数ardunio芯片(Arduino upload program agreement, support for most ardunio chips)
扩展实验5 ATK-RM04 WIFI模块测试实验
- 可以连接WiFi，进行无线传输，主要用于做一些初级32单片机硬件。(Can connect WiFi, wireless transmission, mainly used to do some junior 32 microcontroller hardware.)
Contador de 0 a 9999 con carga y clear
- meter of 0 to 9999 with load and clear
实验8 定时器中断实验
- 中断优先级设置，定时器中断，红灯，每隔200ms翻转一次，绿灯，每隔500ms翻转一次(Interrupt priority settings, timer interrupt, red light, turn once every 200ms, green light, turn once every 500ms)