资源列表
USART
- STM32F103的串口通讯例程，在Keil下通过全面验证，-STM32F103 serial communication routines
headset
- csr 蓝牙3.0 HEADSET 源文件 于ADK2.0下编译包含HST , HFP , USB , A2DP, sd卡 ， 2-mic-cvc 。-BC05 can run with 16m
STC--PWM
- 一个基于STC单片机的C编写的PWM程序，主要介绍如何设置PWM模式及占空比的设置。-STC microcontroller based PWM program written in C, describes how to set the duty cycle of the PWM mode and settings.
pcidriver
- 基于windriver的pci驱动程序源代码，我现在项目开发已经调试好的代码 -pci9052 driver code write in c++
ad7656
- ad7656的原理图，6通道，16位，正负10V输入，非常适合工业控制。本人原创-ad7656 schematic, 6-channel, 16-bit, ± 10V input, ideal for industrial control. My original
HC-SR04
- HCSR04超声波测距模块C程序资料（收集的）-HCSR04 ultrasonic distance measuring module data (collection)
msp430-MCU
- 基于msp430单片机的宽带直流放大器的控制程序。用片内AD/DA实现放大倍数按键控制，LCD界面显示-Broadband msp430 microcontroller based control program the DC amplifier. On-chip AD/DA to achieve the magnification button control, LCD display interface
iic
- source code for interfacing mcp3421 and mcp4728 ics with renasas microcontroller(r8c27 group).
Screen
- 任意点阵字模生成软件源代码，适合于批量点阵生成-Arbitrary dot matrix generated software source code, suitable for generating bulk lattice
stm32PENC28J60
- stm32开发板驱动ENC28J60以太网模块-stm32 ENC28J60 Ethernet driver module development board
Keil_C_Read_write_CS5460
- 用keil C 写的读写CS5460及校准的程式，程式代码是通过验证的。-Keil C used to write the reading and writing CS5460 and calibration programs, the program code is verified.
KT0830EG-SampleCodes
- 昆腾FM 芯片KT0830EG 最新的驱动 适用于嵌入式系统-KT0830EG Driver