资源列表
adc
- 以AT89C51单片机为核心，设计一个基于单片机的数据采集系统,采集16路模拟量.含有源代码，和原理图。-AT89C51 microcontroller as the core to design a microcontroller based data acquisition system, acquisition of 16 analog. Containing the source code, and schematic.
dlxview-win
- DLXview,图形化的系统结构实验研究工具-A useful DLX Architecture Experiment Tool
msp430-shizhong
- 基于msp430f449的定时时钟程序，内容包括计时与显示部分。-Based on the timing clock msp430f449 procedures, including timing and display parts.
msp430-chushihua
- 对于msp430f449各部分外设的初始化程序，需用到外设的程序都要进行这样的初始化。-Peripheral parts of the msp430f449 initialization procedure, the procedure should be required to conduct such peripheral initialization.
AD7705
- AD7705的接口程序，通道和放大倍数均可设置。-AD7705 interface program, the channel and magnification can be set.
nrf24L01_send_freescale
- 实现飞思卡尔单片机NRF24L01通信,包含发送和接受部分，功能已全部实现-Freescale microcontrollers to achieve NRF24L01 communications, including sending and receiving part of the function have been entirely
The-CCD-drive-circuit-based-on-CPLD
- 基于CPLD的CCD驱动电路，QUARTUS仿真分析-The CCD drive circuit based on CPLD, QUARTUS simulation
buf
- 把一个8位二进制数的各位用ASCII码表示之（亦即为“0”的位用30H表示，为“1”的位用31H表示）。该数存放在内部RAM中byte单元中。变换后得到的8个ASCII码存放在外部RAM以buf始的存储单元中去。-To an 8-bit binary numbers that you use the ASCII code (which is " 0" bit with the 30H, said, " 1" bit said with 31H). The nu
yunsuan
- 编程实现运算式c = a2+b2 假定a、 b、 c 3个数分别存放在内部RAM的DA、DB、DC单元中，别有平方运算子程序调用。 （内部RAM的DA、DB、DC单元设为20H 21H 22H） -Programming expression c = a2+ b2 assume a, b, c 3, respectively, the number stored in the internal RAM of the DA, DB, DC unit, do not have the squ
ATmega64-Chinese
- 权威的ATmega64中文资料，包含管脚，内部结构，通用程序等海量内容-ATmega64 authority of the Chinese data, including pins, internal structure, common procedures such as mass content
sci
- 飞思卡尔单片机SCI通信串口模块调试程序！-Freescale MCU SCI serial interface module debugger!
AD-1
- 模拟电压转换成数字电压，AD7705芯片的初始化，寄存器的设置等-Analog voltage into a digital voltage, AD7705 chip initialization, the register settings, etc.